Home |
Search |
Today's Posts |
#21
![]() |
|||
|
|||
![]()
On Tue, 11 Jul 2006 08:34:24 +1000, "Rod Speed"
wrote in : wrote John - KD5YI wrote Rod Speed wrote Geoffrey S. Mendelson wrote Rod Speed wrote Is one transmit and the other receive? Or are they both transmit and receive? They're normally both transmit and receive. That's a shame. Here in Israel we are limited to 100mw EIRP, which severly limits the transmit antenna. There is NO limitation on the receive antenna. A receive antenna has no EIRP, it doesnt radiate any real power. Actually, when properly matched, it radiates half the received power. True, but it's such a low level as to normally be considered insignificant. Which is what I said in different words. Unfortunately some take that to mean there is none. The word REAL was used for a reason. If there were none, a Yagi antenna which used all passive elements save for the driven element would not work. On receive that driven element plays an active (pardon the pun) roll. Having fun thrashing that straw man are you ? Take a deep breath. He was more or less on your side. Not nice to lash out at him too (or anyone for that matter). -- Best regards, FAQ for Wireless Internet: http://Wireless.wikia.com John Navas FAQ for Wi-Fi: http://wireless.wikia.com/wiki/Wi-Fi Wi-Fi How To: http://wireless.wikia.com/wiki/Wi-Fi_How_To Fixes to Wi-Fi Problems: http://wireless.wikia.com/wiki/Wi-Fi_Fixes |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
1st Responder Wireless Acquires TAC 9 Paging | Scanner | |||
Ohio/Penn DX Bulletin #719 | General | |||
FCC: Broadband Power Line Systems | Policy | |||
Extending range of wireless motion sensor | Antenna | |||
Extend range of wireless motion sensor | Antenna |