About Us

Mike Coslo · March 4th 07, 11:57 PM posted to rec.radio.amateur.moderated

wrote in
oups.com:

Most hollow-state ham rigs can handle 2:1 SWR no problem.
Sometimes there is less tolerance for loads that are highly
reactive, though.

What are the practical limitations of the Tube finals apparent
flexibility?

It's really a matter of how the rig was designed.

Many 1950s hollow-state ham rigs were built with pi-networks that
could match a wide variety of loads efficiently. The EF Johnson Viking
2 is a classic example of that type. Many
homebrew designs also had such pi-networks.

The problem is that the components for such a wide-range network tend
to be large, heavy and expensive. So in the late 1950s and early
1960s, rigmakers designed more for compactness than for wide matching
range. Still, the typical
ham rig of those days could usually handle SWR of 2:1 or
less with no problems.

Is it safe to compare the load, plate, and drive controls to some of
the functions of a tuner? (possible real dumb question)

The short answer is "no". Tuning up a hollowstate
ham rig is a similar but not identical to adjusting the
typical tuner.

Some may tell you that all it takes to tune up a tube
transmitter is to "peak the grid and dip the plate", but
that's simply not correct. Tuneup procedures vary
according to rig design and you have to be specific.

Of course once you get the hang of it, the procedure
rapidly becomes second nature.

I enjoy twiddling knobs, kind of the same way I like a manual
transmission. 8^)

What specific hollowstate rigs are you considering?

Last year at Dayton I purchased a 40 and 80 meter Heathkit single
Bander as a learning tool - they are pretty simple. I restored the
80 meter unit, and will start on the 40 meter one sometime. I am now
looking at a Kenwood TS-830S. It's a hybrid, with tube finals. I
really like it so far, although I don't see it replacing my IC-761.
I am hooked on computer control of the newer rig - sometimes! Other
times I just like that retro aspect.

- 73 de Mike KB3EIA -

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SHOP CLEANOUT-(4) vintage tube CB radios-(2) old tube PA system ampsfor guitar projects-tube radios- test equipment-rare items-$10-25 each	Dwight D. Eisenhower	CB	0	November 25th 08 11:32 AM
Test equipment AC socket question - 1 attachment	Michael A. Terrell	Equipment	3	March 19th 06 05:38 PM
Question about AM radio reception, equipment, and expectations	[email protected]	Shortwave	32	March 26th 05 05:08 PM
Retread newbie equipment question	Ira Hayes	Scanner	2	March 3rd 05 05:42 AM
WANTED Old Tube Radios and Stereo Equipment	ImportBoy912	Swap	0	January 17th 04 02:57 PM

Menu

About Us