Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old January 13th 18, 01:04 AM posted to rec.radio.amateur.moderated,rec.radio.amateur.homebrew
external usenet poster
 
First recorded activity by RadioBanter: Oct 2012
Posts: 1,067
Default QRZ Forums - Homebrew and Kit Projects for Thursday 11 January2018

On 1/11/2018 3:59 PM, Ralph Mowery wrote:
In article , rec-radio-amateur-
says...

Homebrew and Kit Projects

///////////////////////////////////////////
Soldering Iron Temperature

Posted: 11 Jan 2018 09:41 AM PST
https://forums.qrz.com/index.php?thr...rature.594974/

Good afternoon,



I have recently begun assembling my own kits and have a question about the
correct temperature for small board applications.



I have a new adjustable temperature iron with a pencil tip that I have been
using to assemble a QRPGuys CW Trainer. I initially set the temperature on
the iron to 450 C - but Im finding that I am not getting great flow and
tend to get blobs on the component leads. Additionally it is taking a long
time (20 seconds) of iron application before the...



Soldering Iron Temperature


You should not be near that hot. Around 350 deg C should be plenty.
You may need a larger tip on the iron. The small tips do not have
enough thermal mass to hold the heat, so the tip temperature drops below
the melting point very fast. Use some 60/40 or 63/37 tin/lead solder.
Don't fool with the lead free junk as it does not wet the joint as well
and takes a somewhat higer timperture. It should not take 20 seconds
per joint either.


Of course you realize the OP was posting on qrz.com was cross-posted by
the ops at panix.com. The OP almost assuredly does not read usenet and
will never see your (very good and knowledgeable) post.

--
==================
Remove the "x" from my email address
Jerry, AI0K

==================


  #2   Report Post  
Old January 14th 18, 01:30 AM posted to rec.radio.amateur.moderated,rec.radio.amateur.homebrew
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 617
Default QRZ Forums - Homebrew and Kit Projects for Thursday 11 January 2018

In article ,
says...


Of course you realize the OP was posting on qrz.com was cross-posted by
the ops at panix.com. The OP almost assuredly does not read usenet and
will never see your (very good and knowledgeable) post.



Looks like I am going to have to add all the QRZ stuff over here to the
Bozo list so I won't see it. Seems like the QRZ stuff is most of what
shows up here and on another group or two.



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
QRZ Forums - Homebrew and Kit Projects for Thursday 11 January2018 Jerry Stuckle Homebrew 1 January 14th 18 01:30 AM
QRZ Forums - Homebrew and Kit Projects for Monday 2 October 2017 QRZ.com via rec.radio.amateur.moderated Admin Homebrew 0 October 2nd 17 06:36 PM
QRZ Forums - Homebrew and Kit Projects for Thursday 6 April 2017 QRZ.com via rec.radio.amateur.moderated Admin Homebrew 0 April 6th 17 08:05 PM
QRZ Forums - Homebrew and Kit Projects for Thursday 30 March 2017 QRZ.com via rec.radio.amateur.moderated Admin Homebrew 0 March 30th 17 05:57 PM
QRZ Forums - Homebrew and Kit Projects for Thursday 23 March 2017 QRZ.com via rec.radio.amateur.moderated Admin Homebrew 0 March 23rd 17 05:16 PM


All times are GMT +1. The time now is 05:51 PM.

Powered by vBulletin® Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2004-2018 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017