Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
Wonder how much BPL garbage that setup would pick up?
My guess is about S7 at 100 feet spacing between houses, on frequencies that BPL was using. That is assuming they didn't crank up the power to meet Part 15 limits so they could go farther and/or have more immunity to noise. A question arises - 30 m from what? If every piece of house wiring has the BPL signals on it, in many locations you cannot get 30 meters away. Correct. The limit is for 30 meters distance. There are cases where it can't be measured there, and the FCC allows measurements to be made at other distances, and extrapolated to 30 meters. But here's the kicker -- they allow the extrapolation at a 40log(distance ratio), unlike virtually every other country in the world. That translates to an inverse-to-the-fourth power ratio. Think any of the Part 15 guys make measurements at 3 meters that COULD be made at 30 meters, just to gain that extra 20 dB? Is there stock equipment for BPL yet? Or could they be using prototypes? At this point, PPL is going commercial in the Allentown area. I have offered several times to show them exactly what they are getting themselves into, but their BPL engineer does not answer my email. That is kinda' odd, because if I were about to invest millions of dollars and a national organization came along and told me that there was a major problem with it, then offered to drive 200 miles to show me, I think I would want to hear what they had to say and would find an hour's time. Any PPL shareholders here? :-) 73, Ed Hare, W1RFI |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Miami area Ham or Radio Tech/Engineer? | Homebrew | |||
for amateurs evacuating the brevard county area... | General | |||
BPL a reality in my area now! | Antenna | |||
Effective area question | Antenna | |||
Parts source in Los Angeles area | Homebrew |