In article et, "KØHB"
writes:

"Mike Coslo" wrote

And it makes an unenforceable power level for no real purpose.

Two points:

POINT A
------------

This "unenforceable" mantra is a weak argument, which does not gain strength
by the repetition.

Of course it's enforceable, or at least just as enforceable as power levels
have ever been. "Unenforceable" is a complete cop out. If power level is
not enforceable at 50W, then it's not enforceable at 2.5W, 25W, 50W ERP,
100W, 200W, or 1.5KW, all of which are power currently exist in FCC Amateur
Radio regulations.

Then WHY have it?

Simply ISSUING ORDERS is a stupid idea without some reasoning
behind it.

So...why is the "maximum power" under your plan 50 W instead of
100 W?

Show your work.


POINT B
------------

That particular power level has a real purpose. The purpose is two-fold.

Well, if YOU said it, it must have a "real purpose." :-)

Purpose #1) It allows us to institute a "learners permit" class of license
in which we can limit power to a level which FCC has stated is safe for both
the user and unknowing passers-by.

What do you mean "we," white man?

I think you think you think more than the OET and the IEEE and the
USAF and the ANSI.

Purpose #2) It allows us to institute a "learners permit" class of license
in which the power level minimizes the unwanted side-effects of granting
broad spectrum access to relatively underqualified operators. Now, before
you spin up your rotors about "but QRP operators work around the world",
bear in mind that most of the "bad" signals heard on HF are the result of
ignorant operators trying to run a lot of power, and the consequent
splatter, flat-topping, birdies, over-compression, etc. On the other hand,
I've never heard a distorted or crappy QRP station. In further support of
the idea is the fact that all these 100W-class rigs you keep harping on are
running at near their designed-in upper capability, making them more likely
to become purveyors of all the crappy-signal symptoms I just talked about.
At 50W they are much less likely to be straining their design specifications
and consequently radiating cleaner signals. In the hands of even a QCAO
life-member it would be hard to splatter/chirp/over-modulate when you're
running at half the design limit of the rig.

Of course. A "learner's permit." As if the ONLY radio emitters in
the world came from amateur radio stations. :-)

Geez...for a work manager supposedly with a degree you sure don't
know much about equipment that can go wrong, be misadjusted, and
lots of other little nasties lurking inside electronics boxes. Tsk, tsk.

"In the hands of you QCAO members," the "expertise" in radio
matters went out the window if you think that RF power output is the
ONLY thing causing splatter/chirp/over-modulation (etc.).

Someone do something nasty in your wheaties this morning? :-)

LHA