LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #9   Report Post  
Old January 6th 04, 03:28 AM
Dee D. Flint
 
Posts: n/a
Default


"N2EY" wrote in message
...
In article , Mike Coslo writes:

That wasn't a good signal W1AW was putting
out, and it was making a mess out of the local neighborhood.


Are you sure the W1AW signal was dirty? An overloaded receiver or

soundcard
will do exaclty what you describe.

That doesn't mean it's impossible that W1AW had a problem, just that all

things
need to be checked out. Have you listened to W1AW since then?

Usually PSK and OOK Morse get along just fine.


Depends on who's doing what. 3579 used to be a popular "glowbug" frequency

for
Morse folks using simple rigs and a colorburst crystal. Then the freq was

taken
over by PSK-31 due to the popularity of the "Warbler".

My point is that by coming out with a ratty signal, W1AW was doing
what so many hams were complaining about K1MAN does. Fire it up, and too

bad
for the rest of you.


W1AW transmits bulletins and code practice on a published schedule, and is

on
every HF amateur band simultaneously. Been doing that for almost 70 years

now.
However, the signal should be clean.

Didja email them? Even that "professional" Harris stuff can go wacko.

73 de Jim, N2EY


I agree with Jim. If their signal had a problem, I'm sure that they would
want to know so email them about it.

Dee D. Flint, N8UZE

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
HOW TO FIX a wide trace (noise) on Tek 465 and 475 scopes Thomas P. Gootee Equipment 0 August 5th 04 02:19 PM
Free: Seattle area; QST and old microwave and pulse gens Tom Bruhns Boatanchors 0 June 22nd 04 05:22 AM
Free: Seattle area; QST and old microwave and pulse gens Tom Bruhns Homebrew 0 June 22nd 04 05:22 AM
question about alinco dj 596 wide option xon Equipment 0 April 15th 04 11:26 PM
question about alinco dj 596 wide option xon Equipment 0 April 15th 04 11:26 PM


All times are GMT +1. The time now is 02:56 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017