LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #12   Report Post  
Old February 22nd 05, 10:09 PM
robert casey
 
Posts: n/a
Default




No doubt. But most of the serious 80M dxers in those days ran "suds", a
lotta power, not just a lotta power but 'WAY too much power. Back then
the max allowable power was one kW input vs. today's 1.5kW output.


Have heard what is likely an urban legend of a ham (who was
also a broadcast chief engineer) using the 50KW AM transmitter in his
charge to work some rare DX on some HF ham band. Late at
night when it was off for maintenance. Seems unlikely as the
power amp would have circuits tuned for the MW AM broadcast
station's frequency and low pass filters to block harmonics
in the SW spectrum. That's not something one can modify
in a few minutes.

Oh, you could connect a ham transceiver to the broadcast
antenna tower to work some 160m DX, but that would be
legal.
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Morse Code: One Wonders... and Begins to Think ! [ -- --- .-. ... . / -.-. --- -.. . ] RHF Shortwave 0 January 5th 04 02:49 PM
Response to "21st Century" Part One (Code Test) N2EY Policy 6 December 2nd 03 03:45 AM
My response to Jim Wiley, KL7CC Brian Policy 3 October 24th 03 12:02 AM
Some comments on the NCVEC petition D. Stussy Policy 13 August 5th 03 04:23 AM
NCVEC NPRM for elimination of horse and buggy morse code requirement. Keith Policy 1 July 31st 03 03:46 AM


All times are GMT +1. The time now is 07:08 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017