| Home |
| Search |
| Today's Posts |
|
|
|
#2
|
|||
|
|||
|
an old freid to some a nightmare to steve wrote: wrote: an old freid to some a nightmare to steve wrote: wrote: wrote: I'm curious what's really holding up the FCC on the issue. So am I. It's nine months since the official close of Comments on the NPRM. Nine months? Gestation almost complete? "Birth" of an R&O soon? :-) That actually scares me. Recall the one that was so poorly written in 1998? R&O poorly written or NPRM That's just the thing. They didn't know what it was. It was a R&O advertised as an NPRM. ah well at least I have my rotos will make eme easier and satelite ops a lot easier when the thing the g-5500 is a realy weaird spend about an hour half assembling the unit will alow fo r pointing at full sky have not picked out an computer interface yet figured get the thing on the tower and set up and then worry about that I was thinking about putting a 2m/440 beam up for satellite, but I don't want to spend the bucks on an az/el and interface controller. Instead, I thought about putting them on a mast bent 30 to 45 degrees. With a beamwidth of 30 deg, it should pick up everything except a direct overhead pass. No cable wrap. |
|
#3
|
|||
|
|||
|
wrote: an old freid to some a nightmare to steve wrote: wrote: an old freid to some a nightmare to steve wrote: wrote: wrote: I'm curious what's really holding up the FCC on the issue. So am I. It's nine months since the official close of Comments on the NPRM. Nine months? Gestation almost complete? "Birth" of an R&O soon? :-) That actually scares me. Recall the one that was so poorly written in 1998? R&O poorly written or NPRM That's just the thing. They didn't know what it was. It was a R&O advertised as an NPRM. ah well at least I have my rotos will make eme easier and satelite ops a lot easier when the thing the g-5500 is a realy weaird spend about an hour half assembling the unit will alow fo r pointing at full sky have not picked out an computer interface yet figured get the thing on the tower and set up and then worry about that I was thinking about putting a 2m/440 beam up for satellite, but I don't want to spend the bucks on an az/el and interface controller. Instead, I thought about putting them on a mast bent 30 to 45 degrees. With a beamwidth of 30 deg, it should pick up everything except a direct overhead pass. No cable wrap. I have used something like that but not had the best of luck In my case I using about 10 percent on the money from a selective cut of my forest and I decided that it a good use for it and not going over board |
|
#4
|
|||
|
|||
|
an_old_friend wrote: wrote: an old freid to some a nightmare to steve wrote: wrote: an old freid to some a nightmare to steve wrote: wrote: wrote: I'm curious what's really holding up the FCC on the issue. So am I. It's nine months since the official close of Comments on the NPRM. Nine months? Gestation almost complete? "Birth" of an R&O soon? :-) That actually scares me. Recall the one that was so poorly written in 1998? R&O poorly written or NPRM That's just the thing. They didn't know what it was. It was a R&O advertised as an NPRM. ah well at least I have my rotos will make eme easier and satelite ops a lot easier when the thing the g-5500 is a realy weaird spend about an hour half assembling the unit will alow fo r pointing at full sky have not picked out an computer interface yet figured get the thing on the tower and set up and then worry about that I was thinking about putting a 2m/440 beam up for satellite, but I don't want to spend the bucks on an az/el and interface controller. Instead, I thought about putting them on a mast bent 30 to 45 degrees. With a beamwidth of 30 deg, it should pick up everything except a direct overhead pass. No cable wrap. I have used something like that but not had the best of luck In my case I using about 10 percent on the money from a selective cut of my forest and I decided that it a good use for it and not going over board Timber or pulp? |
|
#5
|
|||
|
|||
|
wrote: an_old_friend wrote: wrote: an old freid to some a nightmare to steve wrote: wrote: an old freid to some a nightmare to steve wrote: wrote: wrote: I'm curious what's really holding up the FCC on the issue. So am I. It's nine months since the official close of Comments on the NPRM. Nine months? Gestation almost complete? "Birth" of an R&O soon? :-) That actually scares me. Recall the one that was so poorly written in 1998? R&O poorly written or NPRM That's just the thing. They didn't know what it was. It was a R&O advertised as an NPRM. ah well at least I have my rotos will make eme easier and satelite ops a lot easier when the thing the g-5500 is a realy weaird spend about an hour half assembling the unit will alow fo r pointing at full sky have not picked out an computer interface yet figured get the thing on the tower and set up and then worry about that I was thinking about putting a 2m/440 beam up for satellite, but I don't want to spend the bucks on an az/el and interface controller. Instead, I thought about putting them on a mast bent 30 to 45 degrees. With a beamwidth of 30 deg, it should pick up everything except a direct overhead pass. No cable wrap. I have used something like that but not had the best of luck In my case I using about 10 percent on the money from a selective cut of my forest and I decided that it a good use for it and not going over board Timber or pulp? timber mostly indeed most of the wood has been veneer grade one tree was sold at the mill for 1000, bucks (I get half) he is about 3/8th through the woods |
|
#6
|
|||
|
|||
|
an old friend wrote: wrote: an_old_friend wrote: wrote: an old freid to some a nightmare to steve wrote: wrote: an old freid to some a nightmare to steve wrote: wrote: wrote: I'm curious what's really holding up the FCC on the issue. So am I. It's nine months since the official close of Comments on the NPRM. Nine months? Gestation almost complete? "Birth" of an R&O soon? :-) That actually scares me. Recall the one that was so poorly written in 1998? R&O poorly written or NPRM That's just the thing. They didn't know what it was. It was a R&O advertised as an NPRM. ah well at least I have my rotos will make eme easier and satelite ops a lot easier when the thing the g-5500 is a realy weaird spend about an hour half assembling the unit will alow fo r pointing at full sky have not picked out an computer interface yet figured get the thing on the tower and set up and then worry about that I was thinking about putting a 2m/440 beam up for satellite, but I don't want to spend the bucks on an az/el and interface controller. Instead, I thought about putting them on a mast bent 30 to 45 degrees. With a beamwidth of 30 deg, it should pick up everything except a direct overhead pass. No cable wrap. I have used something like that but not had the best of luck In my case I using about 10 percent on the money from a selective cut of my forest and I decided that it a good use for it and not going over board Timber or pulp? timber mostly indeed most of the wood has been veneer grade one tree was sold at the mill for 1000, bucks (I get half) he is about 3/8th through the woods I had looked at some land up near Marquette about 20 years ago - Porcupine Mts, or so the brochure said. Too few jobs up there to make the mortgage payments, and I didn't think there was any way to make the land pay for itself. |
|
#7
|
|||
|
|||
|
wrote: an old friend wrote: wrote: an_old_friend wrote: wrote: an old freid to some a nightmare to steve wrote: wrote: an old freid to some a nightmare to steve wrote: wrote: wrote: Feeble Five Back Slapping at it's best. HUGE SNIP timber mostly indeed most of the wood has been veneer grade one tree was sold at the mill for 1000, bucks (I get half) he is about 3/8th through the woods Just what we'd expect from Morkie. He's the product of rape. He participates in rape. Now he's profiting from the rape of the wilderness. I had looked at some land up near Marquette about 20 years ago - Porcupine Mts, or so the brochure said. Too few jobs up there to make the mortgage payments, and I didn't think there was any way to make the land pay for itself. Ahhhhhhhhhhhhhhh yes...A principal trait of the Feeble Five...Find someone or something do do your work for you. Heaven forbid you'd actually do the work yourself...Or FIND the work...Or MAKE the work... Markie FOUND his niche, however...Made himself look like an idiot then applied for welfare based on his "disability" Seems to have worked. Steve, K4YZ |
|
#8
|
|||
|
|||
|
wrote: an_old_friend wrote: wrote: an old freid to some a nightmare to steve wrote: wrote: an old freid to some a nightmare to steve wrote: wrote: wrote: Three of the Feeble Five in a back slapping contest! How cute! In my case I using about 10 percent on the money from a selective cut of my forest and I decided that it a good use for it and not going over board Timber or pulp? Does it matter? Fiction is fiction. Steve, K4YZ |
|
#9
|
|||
|
|||
|
K4YZ wrote:
wrote: an_old_friend wrote: wrote: an old freid to some a nightmare to steve wrote: wrote: an old freid to some a nightmare to steve wrote: wrote: wrote: In my case I using about 10 percent on the money from a selective cut of my forest and I decided that it a good use for it and not going over board Timber or pulp? Does it matter? sure it does is amy Fireproof Steve? Fiction is fiction. Steve, K4YZ |
|
#10
|
|||
|
|||
|
an Old friend wrote: K4YZ wrote: wrote: an_old_friend wrote: wrote: an old freid to some a nightmare to steve wrote: wrote: an old freid to some a nightmare to steve wrote: wrote: wrote: In my case I using about 10 percent on the money from a selective cut of my forest and I decided that it a good use for it and not going over board Timber or pulp? Does it matter? sure it does How? Fiction is fiction. is amy Fireproof Steve? Why do you keep threatening her with arson, Morkie? Steve, K4YZ |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Persuing a Career in Electronics, HELP! | Homebrew | |||
| Bonafied Proof of LIFE AFTER DEATH -- Coal Mine Rescue | Shortwave | |||