Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
RCA woodworking quandry
Is there any way to shrink this photo so I can see what it is?
"Tom Adkins" wrote in message ... I'm finally getting to the cabinet of my RCA C15-3. There was damage to the top that I thought was from water. The veneer on the left side(viewed from the front) was gone and the surrounding veneer was lifting. The crossbanding was also lifting in the left front corner. I stripped the veneer and cut out the ragged crossbanding. It appears that someone had sat a lead-acid battery on that corner of the radio at one time. The stains on the base wood bear his out. I've since stripped the crossbanding off the entire top, so the top is only the base wood, ~2" wide strips of ~1" board bonded together. The contamination has gotten into the base wood on the entire left side, and left the wood "soft". I can dig it out with a fingernail. This repair is quickly getting beyond my expertise. Thoughts? |
#2
|
|||
|
|||
RCA woodworking quandry
On Sat, 26 May 2007 13:33:37 -0500, "Bruce Mercer"
wrote: Is there any way to shrink this photo so I can see what it is? Brian McAllister Sarasota, Florida email bkm at oldtech dot net |
#3
|
|||
|
|||
RCA woodworking quandry
Bruce Mercer wrote:
Is there any way to shrink this photo so I can see what it is? Thanks Brian. Sorry Bruce, I thought I cut it down before I sent it, I must have sent the original. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
sat.forsale, rec.antiques.marketplace, rec.woodworking | Shortwave | |||
80M Loop Antenna Quandry | Antenna |