| Home |
| Search |
| Today's Posts |
|
#3
October 21st 06, 03:41 AM
posted to rec.radio.scanner
|
|||
|
|||
LF Info: Vintage Regency Flight Scan
"Al Arduengo" wrote in message news  On Fri, 20 Oct 2006 15:51:52 -0400, Private_Sale wrote: I have an old Regency Flight Scan VHF-Air only scanner but no manual. I am looking for instructions on programming the channel bank and also programming direct access frequencies. Here is the scanner: http://www.rigpix.com/regency/regency_actt720a.htm Thanks in advance. Vince I do not think you "program" it per se. It probably uses crystals. -- It's a programmable scanner, and not that hard to program as I remember; I used to have one but it's been about 15 yrs. since I programmed one. I do remember that after entering the freq. by the keypad (on the left) then the number of the channel you wanted the freq. entered into must be plressed (on the right). I didn't have a manual with mine either, but it was simple to figure out. H.J. p.s. Sell that one at a garage sale and get a RS-2052 at a close-out steal. **UHF airband**1,000 channel**GREAT SCANNER** |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Utillity freq List; | Shortwave | |||
| FA : REGENCY Flight Scan air band - vintage, 2 DAYS LEFT! | Scanner | |||
| FA : REGENCY Flight Scan air band - vintage, 2 DAYS LEFT! | Swap | |||
| WTB : Crystals for Regency Flight Scan | Scanner | |||
| FA: REGENCY Flight Scan vintage air band scanner - MINT! | Swap | |||
Threaded Mode
