Home |
Search |
Today's Posts |
#10
|
|||
|
|||
BCD396T Piece of junk or am I missing something?
Quick suggestion ......
IF you go back and buy another one, get on Uniden's site and download any firmware updates ( and the program to update the scanner ) and also grab the FREE ( good price ) software they have for the radio, setup is pretty easy and straight forward ..... as long as you have a TRUE serial port on your computer, USB to serial convertors some (most) times DO NOT WORK right. You'll spend a day or so just figuring out what to do within the software, but it makes programming the radio MUCH easier, since you don't have TONS of putton presses, and you can see what your doing in a "spread sheet" type enviroment. There are numerous sites that have frequency and trunking information, ( talk groups, Logical Channel Numbers, etc ) on them. The software ALLOWS you to copy & paste from web pages, which makes it even easier. Join Yahoo's "BCD396T" Group, and there is dozens of files in there, of programmed systems you can download and use. ( If the system you WANT is not there, down load a few anyway and load them in to see what the other people have done ( give you an idea how to set up systems ) The BCD396T & BCD996T ( same radio different package - handheld/mobile) are GREAT radios, I am always finding something new to do with mine, or how to use a feature I didn't know what to do with the first time around. Be patient, it does get frustrating because the radio does SO much its overwhelming at first. Litle by little however it all starts to make sense. Guess that wasn't such a 'quick' suggestion ) wrote in message oups.com... Maybe you should have ASKED how to use it BEFORE returning it ...... seems pointless to ask things now. As I mentioned, nobody knew anything about it at Fry's. I asked the whole department, but nobody who knew anything. If I knew the unit was good I would have put more time and effort in it. The manual doesn't provide any basic setup steps. Goes rimmediately into describing the systems: trunking, digital, etc... I did experiment for almost half a day. No luck. I did read the manual from the beginning, but very vague. No explanations except for the simple things like volume control and how to charge it. All preprogrammed systems where pretty much useless to my area.. next time, try reading the manual ( completely), look up frequency information ( on line or in books ), experiment a little ( if you program something wrong, you didn't really do any damage ), and then ASK questions BEFORE you return it. These new scanners are not plug and play, they are getting quite sofisticated, and you actually have to learn about all the new technology ( being used in the scanner and about the systems they are trying to receive ) I understand now. I'll give it another try. Thanks. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
buying BCD396T in NYC? | Scanner | |||
FT: Uniden BCD396T For SW Reciever | Scanner | |||
FS..uniden bcd396t | Scanner | |||
Beware BCD396t | Scanner | |||
BCD396T | Scanner |