Home |
Search |
Today's Posts |
#8
![]() |
|||
|
|||
![]()
"Jackie" wrote:
"Dwight Stewart" wrote: A very small, micro-thin, wire ran around the entire ceiling of the apartment (right where the wall meets the ceiling), fed into a tuner/pre-amp. To keep visibility low, the wire is glued in place (a tiny touch of Elmer's school glue about every foot. That's something that I could do here. Thanks for the ideas Dwight... It works, but it's real overkill. In my case, it's done now so I use it with the shortwave. But I probably wouldn't do it again. Instead, I'd probably look into some type of folded wire antenna that is less intrusive. Luckily, antennas for scanners are much shorter than antennas for a shortwave receiver. Take care, Jackie. Dwight Stewart (W5NET) http://www.qsl.net/w5net/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FS: scanner stuff | Scanner | |||
Coax signal deteriotion to Scanner | Scanner | |||
FS: scanner stuff | Scanner | |||
Geller Media | Broadcasting |