Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Dwight Stewart k.net...
^ wrote: ^ ... Radio Shack Pro-43. ^ ... most of the keys do not work. ^ ... product commonly called "Liquid Solder." ^ .. good alternative. The pens used ^ to repair traces on circuit boards ... Thanks Dwight. I'm having to press very hard on the buttons of my 20 year old PRO-43 so I might use your alternative. Frank |
#2
![]() |
|||
|
|||
![]() "Frank" wrote: Thanks Dwight. I'm having to press very hard on the buttons of my 20 year old PRO-43 so I might use your alternative. It works. Of course, as others have stated, if you can get a replacement keypad, that is the easiest way to go. But recoating the pads may be the only hope for older scanners with no replacement available. Take care. Dwight Stewart (W5NET) http://www.qsl.net/w5net/ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Yaesu Rotor Repair | Antenna | |||
Yaesu Rotor Repair | Equipment | |||
Kenwood & Yaesu Repair Service | Equipment | |||
The Philco Repair Bench updates... | Boatanchors | |||
Export and Domestic Radio Repair AM/FM/SSB | CB |