Well, I've read the whole manual and I still don't see how to do this
simple thing. How can you tune to a specific frequency without
programming it into a channel. Then I'd like to step/search up and down
from there. On the Pro96 there's a "tune" button that does this but how
do you do it on the BC296D?

This will get you at least half way the

1. From normal SCAN mode, momentarily press HOLD/MAN.
2. Then press and hold the HOLD/MAN button until the readout toggles to
ROTARY:FREQUENCY.
3. Then type in the freq you want to tune to WITHOUT hitting E/enter (i.e.
4,5,3 for 453 mhz)
4. Then push the rotary up or down and you're there.

Don't know how to scan/search from that point though - perhaps someone else
can add to tihis?

RV
"Richard Kuhler" wrote in message
...
Well, I've read the whole manual and I still don't see how to do this
simple thing. How can you tune to a specific frequency without
programming it into a channel. Then I'd like to step/search up and down
from there. On the Pro96 there's a "tune" button that does this but how
do you do it on the BC296D?





-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----