| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
On Tue, 26 Oct 2004 03:41:58 GMT, asym said
in rec.radio.scanner: Obviously, height *and* good cable is the best. But if you're in a situation where it's one or the other, go for height first, replace the cable later if you can. Or go for the height and use a good low noise preamp mounted right at the antenna. |
|
#2
|
|||
|
|||
|
On Wed, 27 Oct 2004 02:21:05 GMT, Al Klein wrote:
On Tue, 26 Oct 2004 03:41:58 GMT, asym said in rec.radio.scanner: Obviously, height *and* good cable is the best. But if you're in a situation where it's one or the other, go for height first, replace the cable later if you can. Or go for the height and use a good low noise preamp mounted right at the antenna. Yeah that's another good option as well.. a decent preamp can cost quite a bit less than a long run of great cable like 9913 or 400.. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Discone antenna plans | Antenna | |||
| FS: sma-to-bnc custom fit rubber covered antenna adapter | Antenna | |||
| FS: Connectors, Antennas, Meters, Mounts, etc. | Antenna | |||
| FS: Connectors/Adapters/Meters/Etc. | Equipment | |||
| LOOKING WTB HF discone antenna | Antenna | |||