Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]() keep the 2006 and forget the 2042. the 2042s had NO internal shielding to speak of and had VERY easily overloaded front ends. this causing a LOT of overload , spurious , and intermod issues that the 2005 / 6s did not have. the inside of the 2042 is a simple circuit card inside a plastic box. the 2005 / 6s had many shielded compartments and a lot of bypassing. when using either the 2042 OR the 2005 / 6 with the preferred " Probe " software ( when using the opto boards accessory ) ... the abilities of channel selection and amount of channels scanned ( unlimited ) is controlled by the computer anyway ..... making the basic channel abilities of the scanner unimportant. the 2042 looked better than the 2006 and had that nifty manual tune knob.... but " in real life " ...... when using an installed Opto board, one NEVER touches the radio in normal use so either is unnecessary. BOTH radios can track at very high channel rates using Probe software ( 50 - 70 channels per sec ) and neither is superior in that respect. if you must use the 2042 with the opto board , a " must have " accessory is a Stridsberg milticoupler . this , not for the multi set capability it provides , but for the " small ' amount of gain and enormous front end overload protection ( 31 dbm of 3rd order IP3 and 17 dbm of P1 ) it provides. nearly ANY consumer scanner needs one of these, but the 2042 especially benefits form using one of those. the 20 digit " secret code " ( available all over the web ) unlocks nearly all of the opto boards that were ever made... except for the more recently made boards. older opto boards are preferred for this reason. this is a " serious " issue on the ( normally ) unlockable 2042 because it needs an older opto board to open it up completely. ( and is ONLY opened up under computer control ) k......... On Sun, 19 Jun 2005 00:40:04 GMT, Scan Da Bands wrote: Looking for a MINT or close Realistic Pro-2042 with the Optoelectronics 535 installed. Might consider an Opto Optocom if we can work a deal. Reply below. Also have a fully working Realistic Pro-2006 with FULL (Not Lite) 456 Opto installed. Rocks with Probe 7.0 might consider trading or will sell for right offer. Thanks, Tom tommyboys_ads(AT)verizon(DOT)net (AT) = @ (DOT) = . |
Thread Tools | Search this Thread |
Display Modes | |
|
|