Hi All.
I have a RS PRO-97 scanner and trying to enter a group of trunking
frequencies. When I enter them just the way the book says and hit scan it
goes to one channel and just buzzez. It just seems to be in regular scan
and not trunktracer mode.
The system I am putting into the scanner is an EDACS 800MHZ trunking system.
Any help is appreciated.
George-NY

You REALLY need to use the WIN97 software. Programming a trunking system by
hand is almost impossible,
Are you trying to do Port Authority or Nassau?
"George-NY" wrote in message
...
Hi All.
I have a RS PRO-97 scanner and trying to enter a group of trunking
frequencies. When I enter them just the way the book says and hit scan it
goes to one channel and just buzzez. It just seems to be in regular scan
and not trunktracer mode.
The system I am putting into the scanner is an EDACS 800MHZ trunking
system.
Any help is appreciated.
George-NY

Hi Bruce
Thanks for reply. I am programing Nassau County. I programed my PRO-95 and
it worked great but programing the PRO-97 does no work.
George-NY
"Bruce Markowitz" wrote in message
...
You REALLY need to use the WIN97 software. Programming a trunking system
by
hand is almost impossible,
Are you trying to do Port Authority or Nassau?
"George-NY" wrote in message
...
Hi All.
I have a RS PRO-97 scanner and trying to enter a group of trunking
frequencies. When I enter them just the way the book says and hit scan
it
goes to one channel and just buzzez. It just seems to be in regular
scan
and not trunktracer mode.
The system I am putting into the scanner is an EDACS 800MHZ trunking
system.
Any help is appreciated.
George-NY

On Mon, 3 Jul 2006 20:29:54 -0400, "George-NY"
wrote:

Thanks for reply. I am programing Nassau County. I programed my PRO-95 and
it worked great but programing the PRO-97 does no work.

Are you sure that all the channels AND the bank are set to EDACS? And
that the frequencies are in the correct order (which wouldn't give you
the problem you have, but would give you a problem)?

Thank you Bruce and Al for taking your time to help me. I checked over what
I had entered and all was set to ED except the control. It was set to MOT.
How that happened, I have no idea but it is now working.
Thanks again.
George-NY

"Al Klein" wrote in message
...
On Mon, 3 Jul 2006 20:29:54 -0400, "George-NY"
Are you sure that all the channels AND the bank are set to EDACS? And
that the frequencies are in the correct order (which wouldn't give you
the problem you have, but would give you a problem)?

On Tue, 4 Jul 2006 00:30:24 -0400, "George-NY"
wrote:

Thank you Bruce and Al for taking your time to help me. I checked over what
I had entered and all was set to ED except the control. It was set to MOT.
How that happened, I have no idea

One push of the button too many or one too few.

"Al Klein" wrote in message
...
On Tue, 4 Jul 2006 00:30:24 -0400, "George-NY"
wrote:

Thank you Bruce and Al for taking your time to help me. I checked over
what
I had entered and all was set to ED except the control. It was set to
MOT.
How that happened, I have no idea

One push of the button too many or one too few.

Hell yes!! When I first got my 246 and was trying to program it, I had the
computer on with the manual, the manual that came with it open, and a couple
times I got it so screwed up I had to delete the entire system I was trying
to program and start over. It was completely different from the Pro-95 I
learned on so it was all new again almost.
--
"Everything in excess! To enjoy the flavor of life, take big bites.
Moderation is for monks."
[Lazarus Long]