Home |
Search |
Today's Posts |
#6
![]() |
|||
|
|||
![]()
Matt,
Set the BFO control on the right side to the middle point. Thats about 2.5 tweaks from either end. Then when in the ssb mode tune in Donald Duck unitl you get the best sound then fine tune with BFO knob. It takes a safecracker's touch, but soon you won't have to think about it. If you know when & where a particular net tunes up then you can just hop on the frequency directly and fine tune bfo. Up here in New England, Spirit net meets on 3905ish weeknights around 9pm I think. 73 NEO mcnowinski wrote: Help! I cannot seem to properly tune SSB on my 1103 (it is a Degen from China). I have the sparse manual that comes with it, but following its instructions (tune to channel in AM, then hit SSB button and use the Fine Tuning knob) does not accomplish much. In fact, when I turn on SSB, there is very little coming out of the receiver at all (no noise, no signal, no nothing). I know that I must be missing something simple. I have been listening in the 80/75-meter band (3500 to 4000 kHz) and I can tune in some "Donald Duck"-like voices, but switching to SSB and fiddling with the Fine Tuning knob seems useless. Any help is greatly appreciated! Thanks, matt |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
What equipment for SW? | Shortwave | |||
Channel-based AM tube tuner (was Designs for a single frequency high performance AM-MW receiver?) | Shortwave | |||
FS: Hallicrafters HT-4 Transmitter Tuning Units $30 | Boatanchors | |||
FS: Hallicrafters HT-4 Transmitter Tuning Units $30 | Boatanchors | |||
Hallicrafters Tuning Units For HT-4 | Swap |