Meat Plow wrote:
On Mon, 11 Sep 2006 18:17:48 +0000, Rick McCombs Has Frothed:

Meat Plow wrote in
news
On Sun, 10 Sep 2006 14:09:44 -0700, rick.mccombs Has Frothed:

[...[
I didn't find the reset button but I used a smaller screwdriver and got
the back off and that took care of it.

Now that I know how to get the back off do you know how to do the
chaffing mod. (whatever it is called, so that the audio isn't muted when
tuning.)

This is for the 390, don't know if it's the same as the 392 but if you're
smart enough you can tell if it is different:

I did a mod on my DX-390. It will disable the squelch used to keep the
user from hearing the phase lock circuit as he/she changes. It also keeps
a person from being able to "scan the band" and hear all he/she scans.
Anyway, remove the cover and circuit board. If the user doesn't have the
external power supply, they will need to remove the unit's batteries an
hour before they do the mod. If they don't, they will believe they have
zapped the radio. The radio's memory needs to be fully discharged. After
they have done this, remove C167. It's a 1 microfarad capacitor near the
volumn control. My mod's been in effect for two months without any "odd"
influences to the radio.

Note:
Place a jumper wire in place of C167

Isn't there just a pin I can disconnect from one of the ribbon cables?

It's hard to tell from the trace side where the capacitor is.

I was hoping for a less peramant mod incase I don't like the results.