Home Menu

Menu


RadioBanter » rec.radio » Shortwave > terminating a PL-259..what to do with shielding?
 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #9   Report Post  
Old February 11th 07, 04:37 PM posted to rec.radio.shortwave
BDK BDK is offline
external usenet poster
  
First recorded activity by RadioBanter: Sep 2006
Posts: 74
Default terminating a PL-259..what to do with shielding?
In article ,
says...
On Sat, 10 Feb 2007 23:00:29 -0500, BDK
wrote:

In article .com,
says...
Hi all-- what are you supposed to do with the braided shielding
material when terminating an rg58 coax cable (off my antenna balun)
into a pl-259 plug? I ended up stripping it all off the dielectric
and then soldered the lead to the pl259 by dripping in some solder to
the male plug. it seems to work ok but i'm wondering if the braided
shielding material should be making contact with the pl259 plug for
better noise dissipation or something. thanks.




There's an adaptor you need for RG58 cable that screws inside the 259 to
make the shield connect to the shell of the 259.

You don't solder anything by "dripping" solder into a joint. Put the
iron or gun ON the end of the pin, and and then touch the solder to the
little cut out area. When it melts, it will flow into the joint and look
nice and shiny.

Ask someone who is in your local scanner group to show you.

BDK

Even if using the reducer, I still solder the braid through the four
holes in the plug. High heat with a big iron, short time.

Maybe, for listening purposes, it isn't needed, but I've always done
the four holes.

The reducer is a UG-175 or UG-176, depending on the thickness of your
cable.

bob
k5qwg


I tin the adaptor, the hole area of the 259, and only solder two holes.
It's overkill for most uses. And if I have one, a huge iron. Mine died a
while back, and I haven't found one cheap enough to buy yet.



BDK
Reply With QuoteReply With Quote
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Threaded Mode Threaded Mode

Posting Rules
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Terminating a Rhombic Rick Antenna 6 November 15th 06 06:15 PM
Plans for B&W BWD-65 & BWD-90 Folded Dipole Balun & Terminating Resistor Dave Antenna 11 November 25th 05 01:59 PM
Shielding Question Mike Coslo Antenna 12 February 14th 04 01:10 PM
Mobile Icom 706MKIIg shielding problem ? Jim Dolson Equipment 6 August 4th 03 12:00 PM
Mobile Icom 706MKIIg shielding problem ? Jim Dolson Equipment 0 August 4th 03 12:25 AM


All times are GMT +1. The time now is 01:25 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Contact Us RadioBanter forum home Privacy Statement
Copyright © 2017