Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
RHF wrote:
# 1 - Consider using a good 'earthen' Ground with your Radio and Antenna. I tried it. The clumps of dirt don't adhere to each other or the radio very well, so forming a continuous earthen ground is very unlikely. Would a long hose tamped full of moist dirt give me a good connection to the outside world? I figure I could use a long earth worm to connect the dirt in the hose to the terminal on the back of the set. mike |
#2
![]() |
|||
|
|||
![]()
On Jul 1, 10:29 am, m II wrote:
RHF wrote: # 1 - Consider using a good 'earthen' Ground with your Radio and Antenna. - I tried it. The clumps of dirt don't adhere to each - other or the radio very well, so forming a continuous - earthen ground is very unlikely. - - Would a long hose tamped full of moist dirt give - me a good connection to the outside world? - - I figure I could use a long earth worm to connect the - dirt in the hose to the terminal on the back of the set. - - mike Mike - Are you so over in-tell-i-gent. -or- may be simply so 'hosed' ~ RHF "EARTHEN" GROUND : {Grounding} What I mean by a good 'earthen' Ground is a Metal Ground Rod in-the-ground -vice- An attempt at Grounding via a Cold Water Pipe with many questionable Mechanical Connections (Joints} -or- Using the Round Ground Pin on an Electrical Outlet also with many questionable Mechanical Connections (Joints} as a Grounding-Point. Well Grounded is Well Grounded and it usually requires having a Metal Ground Rod placed into the Earth -hence- an 'earthen' Ground. =IF= A good 'earthen' Ground can not be set-up {constructed} -then- Consider some type of Balanced Antenna like a Dipole of Loop to achieve the best Radio Reception that you can. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|