How does the Icom 746 Pro's receiver compare to some of the medium to
high-end DSP-based SW receivers, such as the JRC NRD-545 and the
TenTec DX-340?

I'm mostly interested in LW and MW DXing--how does the 746 perform on
these bands?

It seems to me that the 32-bit DSP and 24-bit AD in the 746 are a cut
above the JRC and TenTec, but does this translate into better real-
world RX performance?

wrote:
How does the Icom 746 Pro's receiver compare to some of the medium to
high-end DSP-based SW receivers, such as the JRC NRD-545 and the
TenTec DX-340?

I'm mostly interested in LW and MW DXing--how does the 746 perform on
these bands?

It seems to me that the 32-bit DSP and 24-bit AD in the 746 are a cut
above the JRC and TenTec, but does this translate into better real-
world RX performance?




http://www.dxing.info/equipment/icom_ic756_plimmer.dx


There ya go. lots of info on the web.

this is a good one...

GOOD DX!
Drifter...

On Oct 26, 3:23 pm, wrote:
How does the Icom 746 Pro's receiver compare to some of the medium to
high-end DSP-based SW receivers, such as the JRC NRD-545 and the
TenTec DX-340?

I'm mostly interested in LW and MW DXing--how does the 746 perform on
these bands?

It seems to me that the 32-bit DSP and 24-bit AD in the 746 are a cut
above the JRC and TenTec, but does this translate into better real-
world RX performance?

Soda - Here are three to read - hope this helps ~ RHF

The Icom IC-746 Pro (IC-7400) Receiver
-written by- Bjarne Mjelde, Norway
http://www.dxing.info/equipment/icom_ic746_mjelde.pdf
NOTE - Please keep in mind that I am dealing with the
functionality and performance of the Icom 746 Pro Receiver
"ONLY" as a MW and SW Receiver.

Icom IC-756 PRO III side by side with the Drake R8B
-written by- John Plimmer
http://www.dxing.info/equipment/icom_ic756_plimmer.dx

The Icom IC-746 Pro as a Communications Receiver
-by Jim Clake [NR2G]
http://www.monitoringtimes.com/html/mticomic746.pdf