Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
On Jan 20, 3:18 am, Rfburns wrote:
On Jan 20, 3:14 am, Rfburns wrote: On Jan 20, 3:11 am, Rfburns wrote: On Jan 20, 3:07 am, Rfburns wrote: On Jan 20, 2:56 am, AussieDrifter wrote: Rfburns, if possible could you post a sample of what you're hearing ![]() Cheers Mark ------------------------------------------------------------------ Location: Canberra Australia Radio: Icom R75 with DSP options Antenna: Cliff Dweller 2 Website:http://aussiedrifter.blogspot.com/ Listen Live via USTREAM.TV: http://www.ustream.tv/channel/aussie...wave-listening Rfburns wrote: On Jan 20, 2:25 am, wrote: On Jan 20, 6:56 am, AussieDrifter wrote: G'day Guys, I can hear the tones, but based on the timing sequences, what I'm actually hearing is the Transmission Tone faintly, so there is no change of me hearing the echo ![]() I have two recordings: 1. The first is a screen video capture of the Atom Clock Software and the radios audio for audio to show the timings: http://www.mediafire.com/?2v11ey4l1xd 2. is just an mp3 recording of similar period. http://www.mediafire.com/?byt1jtm91uz -- ------------------------------------------------------------------ Location: Canberra Australia Radio: Icom R75 with DSP options Antenna: Cliff Dweller 2 Website:http://aussiedrifter.blogspot.com/ Listen Live via USTREAM.TV: http://www.ustream.tv/channel/aussie...wave-listening I am getting nothing an any of my antennas. Bummer. I will listen for the next feed. Terry Terry I can hear it right now on 7.4075 here in West Virginia - both the up transmission and the reflected signal. jw -- I wish I could but I'm not set up for recording. I'm actually listening on 7.40690 which is an offset of 600Hz with the active audio filter in peak mode. The reflected bounce signal seems to have a little bit of dopler shift on it and sounds slightly higher in frequency than the two second up transmission. jw The 7 MHz signal is louder than the previous 6 MHz signal hear in West Virginia. I also hear some goof balls transmitting CW near the frequency jw At times the reflected signal is almost as loud as the up transmission. jw At 3:15 AM EST the signal is getting louder. Pretty cool stuff. jw That's the end it just went off exactly at 0830z. No more moon signals jw |
#12
![]() |
|||
|
|||
![]()
Rfburns wrote:
On Jan 20, 3:14 am, Rfburns wrote: On Jan 20, 3:11 am, Rfburns wrote: On Jan 20, 3:07 am, Rfburns wrote: On Jan 20, 2:56 am, AussieDrifter wrote: Rfburns, if possible could you post a sample of what you're hearing ![]() Cheers Mark ------------------------------------------------------------------ Location: Canberra Australia Radio: Icom R75 with DSP options Antenna: Cliff Dweller 2 Website:http://aussiedrifter.blogspot.com/ Listen Live via USTREAM.TV: http://www.ustream.tv/channel/aussie...wave-listening Rfburns wrote: On Jan 20, 2:25 am, wrote: On Jan 20, 6:56 am, AussieDrifter wrote: G'day Guys, I can hear the tones, but based on the timing sequences, what I'm actually hearing is the Transmission Tone faintly, so there is no change of me hearing the echo ![]() I have two recordings: 1. The first is a screen video capture of the Atom Clock Software and the radios audio for audio to show the timings: http://www.mediafire.com/?2v11ey4l1xd 2. is just an mp3 recording of similar period. http://www.mediafire.com/?byt1jtm91uz -- ------------------------------------------------------------------ Location: Canberra Australia Radio: Icom R75 with DSP options Antenna: Cliff Dweller 2 Website:http://aussiedrifter.blogspot.com/ Listen Live via USTREAM.TV: http://www.ustream.tv/channel/aussie...wave-listening I am getting nothing an any of my antennas. Bummer. I will listen for the next feed. Terry Terry I can hear it right now on 7.4075 here in West Virginia - both the up transmission and the reflected signal. jw -- I wish I could but I'm not set up for recording. I'm actually listening on 7.40690 which is an offset of 600Hz with the active audio filter in peak mode. The reflected bounce signal seems to have a little bit of dopler shift on it and sounds slightly higher in frequency than the two second up transmission. jw The 7 MHz signal is louder than the previous 6 MHz signal hear in West Virginia. I also hear some goof balls transmitting CW near the frequency jw At times the reflected signal is almost as loud as the up transmission. jw At 3:15 AM EST the signal is getting louder. Pretty cool stuff. jw RFBurns, Lucky little bugger ![]() Mark ------------------------------------------------------------------ Location: Canberra Australia Radio: Icom R75 with DSP options Antenna: Cliff Dweller 2 Website: http://aussiedrifter.blogspot.com/ Listen Live via USTREAM.TV: http://www.ustream.tv/channel/aussie...wave-listening |
#13
![]() |
|||
|
|||
![]()
Rfburns wrote:
On Jan 20, 3:18 am, Rfburns wrote: On Jan 20, 3:14 am, Rfburns wrote: On Jan 20, 3:11 am, Rfburns wrote: On Jan 20, 3:07 am, Rfburns wrote: On Jan 20, 2:56 am, AussieDrifter wrote: Rfburns, if possible could you post a sample of what you're hearing ![]() Cheers Mark ------------------------------------------------------------------ Location: Canberra Australia Radio: Icom R75 with DSP options Antenna: Cliff Dweller 2 Website:http://aussiedrifter.blogspot.com/ Listen Live via USTREAM.TV: http://www.ustream.tv/channel/aussie...wave-listening Rfburns wrote: On Jan 20, 2:25 am, wrote: On Jan 20, 6:56 am, AussieDrifter wrote: G'day Guys, I can hear the tones, but based on the timing sequences, what I'm actually hearing is the Transmission Tone faintly, so there is no change of me hearing the echo ![]() I have two recordings: 1. The first is a screen video capture of the Atom Clock Software and the radios audio for audio to show the timings: http://www.mediafire.com/?2v11ey4l1xd 2. is just an mp3 recording of similar period. http://www.mediafire.com/?byt1jtm91uz -- ------------------------------------------------------------------ Location: Canberra Australia Radio: Icom R75 with DSP options Antenna: Cliff Dweller 2 Website:http://aussiedrifter.blogspot.com/ Listen Live via USTREAM.TV: http://www.ustream.tv/channel/aussie...wave-listening I am getting nothing an any of my antennas. Bummer. I will listen for the next feed. Terry Terry I can hear it right now on 7.4075 here in West Virginia - both the up transmission and the reflected signal. jw -- I wish I could but I'm not set up for recording. I'm actually listening on 7.40690 which is an offset of 600Hz with the active audio filter in peak mode. The reflected bounce signal seems to have a little bit of dopler shift on it and sounds slightly higher in frequency than the two second up transmission. jw The 7 MHz signal is louder than the previous 6 MHz signal hear in West Virginia. I also hear some goof balls transmitting CW near the frequency jw At times the reflected signal is almost as loud as the up transmission. jw At 3:15 AM EST the signal is getting louder. Pretty cool stuff. jw That's the end it just went off exactly at 0830z. No more moon signals jw So, Whats the next project to get the world wide radio community glued to the radio at the same time ? This was fun ![]() Cheers Mark ------------------------------------------------------------------ Location: Canberra Australia Radio: Icom R75 with DSP options Antenna: Cliff Dweller 2 Website: http://aussiedrifter.blogspot.com/ Listen Live via USTREAM.TV: http://www.ustream.tv/channel/aussie...wave-listening |
#14
![]() |
|||
|
|||
![]()
On Jan 19, 10:56 pm, AussieDrifter
wrote: G'day Guys, I can hear the tones, but based on the timing sequences, what I'm actually hearing is the Transmission Tone faintly, so there is no change of me hearing the echo ![]() I have two recordings: 1. The first is a screen video capture of the Atom Clock Software and the radios audio for audio to show the timings: http://www.mediafire.com/?2v11ey4l1xd 2. is just an mp3 recording of similar period. http://www.mediafire.com/?byt1jtm91uz -- ------------------------------------------------------------------ Location: Canberra Australia Radio: Icom R75 with DSP options Antenna: Cliff Dweller 2 Website:http://aussiedrifter.blogspot.com/ Listen Live via USTREAM.TV: http://www.ustream.tv/channel/aussie...wave-listening I recorded them both. No reflections heard in the SF Bay area. Well, I'm glad I got to hear HAARP for once. Oh, and the sky didn't fall down. Scientists 1, crack-pots 0. |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
moon bounce | Policy | |||
moon bounce | CB | |||
moon bounce | Swap | |||
Moon Bounce | Shortwave |