The longwave loophead is very good, although I haven't tried the tropical
band unit. I am in the process of designing a three band model that covers
longwave through the tropical range for one of the manufacturers in this
country. If anybody has any features they are looking for, please let me
know. It is early enough in the game to implement them right now.
I have experimented with multiple band windings on one ferrite rod, and
there are too many comprimises in the design. As an example, I encountered
self-resonance effects from interraction with the windings for the different
ranges. This is the reason that Philips used separate LW/MW loopstick
antennas with the D2999. This is also the reason that the loop antenna
manufacturers in the USA are also using separate plug in loops.
The main thing that is holding me up with the tropical band unit right now
is that I have to wait until I get some samples of ferrite rod with a mu of
400 or so. I've got some 900mu material, but with a permeability this high,
only 16 turns center tapped, are needed for the required inductance. I have
discovered that at least 40 turns are required in order to develop enough
magnetic current in the ferrite rod for adequate amplitude. With my current
stock, the tropical band loopstick in about 10dB lower in output.
I am thinking about a rod diameter of between 1/2 inch to 3/4 of an inch. It
seems that output amplitude has a relationship to the cross sectional area
of the ferrite itself.
An alternative to thie multiple head design would be to use a high Q tuning
capacitor with a range of 14pF to 1500pF.
A 6:1 ball reduction drive would be used with this cap in order to make
tuning easier. I have built a couple of prototypes in the last couple of
weeks, using #36 x 14 strand Litz wire, and the results have been very good.
This design seems to work fairly well, even without regeneration, but let me
know if that is something you would like to see.

Pete

"RHF" wrote in message
...
On Feb 9, 5:00 pm, junius wrote:
-
- I've seen plenty of posts here praising the Quantum Loop
- antenna.
- I'm curious to know, has anyone tried the Tropical Band
- loophead offered for the Quantum Loop antenna?
- If so, how's the performance, and how does it compare
- with other antennae that you've used for tropical band
- listening?
- Also, any opinions on the longwave loophead?
-
- Regards,
-
- Junius
-
- http://www.dxtools.com/PRODUCTS.htm
-

Junius - I never knew that they offered a Loop Head
for the Tropical Bands - you live and learn ~ RHF

Looked around and found this "RadioIntel Review"
of the Quantum QX Loop v2.0
http://www.radiointel.com/review-qloop.htm
-by- Jay Allen - RadioIntel Contributing Editor
http://www.radiointel.com/about.htm

TROPICAL BANDS LOOPHEAD : (~1.8 to ~6.2 MHz)
http://www.dxtools.com/QX.htm
http://www.dxtools.com/QXv2+.htm
Looks like it works with both the Quantum QX Loop v2.0
and the Quantum QX Loop v2.0 Plus.

FWIW - I have the older Quantum QX Pro Loop [15"] that
http://www.dxtools.com/QXPro.htm
has a switch for both AM/MW and LW; but never found
anything down in the Longwave Band that 'interested' me.
The Quantum QX Pro Loop works great on the AM/MW Band.