LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #13   Report Post  
Old April 18th 08, 10:32 PM posted to rec.radio.shortwave
external usenet poster
 
First recorded activity by RadioBanter: Aug 2006
Posts: 49
Default Minimum gauge for groud...


"Telamon" wrote in message
...
In article ,
"Michael" wrote:

"Telamon" wrote in message
...

Where he lives a common mode antenna is most likely the worst choice
for
an antenna anyway.


What antenna would you recommend ??? Besides dead poultry.

Michael


Anything not a common mode antenna such as a random/long wire.

Make a dipole or a loop antenna. Those antennas don't need a ground to
operate.


I already have a di-pole. A 102' G5RV on my roof. I'm building a second
antenna because my current 150' long wire has fallen apart on the roof after
being up there for three years. I have an ICE-180 balun that I can take off
of that mess, so I figured I'd use that in the construction of something
that can make use of it, like an inverted L. So far I just spent money on a
new 6' ground rod and a 20 buck spool of antenna wire. Under 50 bucks
total. Why the hell wont I get an effective ground here with a six foot
ground rod ??? I always thought the ground here in this area had great
conductivity. That is why there are so many MW transmitters here.

BTW... My G5RV works very well from 5 megahertz to 10 megahertz. Is isn't
so good below of above that. My 150' long wire was great for anything above
10 megahertz. Unbelievably, it was also very good for 3 megahertz to 4
megahertz. I have no idea why. The way I had that one grounded was, I'm
sure, a poor way to do it. I have a 12 gauge wire going from the radio, up
on the roof to the ICE-180 balun's ground, and then back down the house to a
ground rod in the earth. The current ground rod is only 3' long iron bar.
Don't ask me how, but it worked.

Michael


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Minimum gauge for groud... Dave[_15_] Shortwave 2 April 16th 08 03:33 PM
Minimum gauge for groud... Telamon Shortwave 2 April 16th 08 09:25 AM
Minimum gauge for groud... msg Shortwave 0 April 15th 08 03:16 PM
Minimum gauge for groud... Burr Shortwave 0 April 15th 08 05:37 AM


All times are GMT +1. The time now is 12:48 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017