LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #6   Report Post  
Old May 17th 08, 06:30 AM posted to rec.radio.shortwave
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 4,494
Default Dual connection to same antenna

In article
,
RHF wrote:

On May 16, 3:55*pm, Telamon
wrote:
In article
,





*RHF wrote:
On May 15, 6:19*pm, Telamon
wrote:
In article ubQWj.2239$Yp.2147@edtnps92, m II wrote:
Telamon wrote:


Instead of just disconnecting the radio and ground you might also
want
to connect the coax center conductor and shield together at that
switch
point.


After giving this some thought, I got to wondering...


The induced voltage in the antenna has an instantaneous vector value.
Same on the outer sheathing of the coax. When the signal in the
sheath
is redirected to the inner conductor, it will, in effect, be changing
direction.


That changed direction will be in opposition to the signal in the
main
antenna wire.


Maybe. At some frequencies it will sum in opposition but not at all
frequencies.


I'm thinking that the length of the coax will in effect be subtracted
from the antenna length, not added as I had previously thought.


The antenna, apparently, is only as long as the wire portion MINUS
the
coax length.


This is all assuming that the switch is indoors, at the very end of
the
coax, not where the antenna joins the inner conductor.


- I suggested that you short the outer and inner coax conductor
- so the wire and coax would function common mode.
-
- Essentially the coax would just make the wire part look longer.
-


House -o======------------------------------======x


x======-------------------------------======o- Shop


-o PL-259 Plug
= Coax Cable
- Antenna Wire
x Shorted End


OK that works ~ RHF


-but- It brings the 'common-mode' noise from the
House to the Shop and the Shop to the House.
*.


- If he is not in his house to make the electrical noise
- then there should not be a problem right?
-
- What do you say to that Mr. Logic Person?
-

Telamon,

Houses are filed with . . .

'other' People {Family Members


How do you know he lives with other people?

Who each use Electrical Items

that Generate RFI and EMF Noise Artifacts


If he does live with other people he asks them to keep the noise makers
turned off.

PLUS - The ever present Stand-by-Mode

and Ready-On / Instant-On Devices


You turn them off or unplug them.

that Populate Every Home

each with it's own unique Electronic Signature.

Telamon - NO LOGIC REQUIRED :


I require logic.

It's Just Plain Common Sense. ~ RHF
.


Your common sense is nonsense.

--
Telamon
Ventura, California
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dual Location Connection to Same Antenna Wire - Use Both Ends of theWire RHF Shortwave 2 May 15th 08 03:30 PM
Antenna connection on a Kenwood R-5000? Mike M. Shortwave 4 March 3rd 08 01:39 AM
Chemical to Improve Electrical Connection in Antenna Elements Rob Antenna 2 February 25th 05 04:26 AM
Through the wall antenna connection Jim Volstad Antenna 7 March 23rd 04 08:48 AM
Antenna Connection on Sat800 Bill Beam Shortwave 2 September 2nd 03 03:20 AM


All times are GMT +1. The time now is 11:45 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017