Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Liquid Display
Hi,
Was wondering if the display liquid on a DX-394 can be fixed? Radio was dropped and numbers only partially show on screen. Thank you for your time and patience...................B |
#2
|
|||
|
|||
Liquid Display
On Jul 18, 10:32*am, RHF wrote:
On Jul 17, 8:50*pm, (Bruce Deardorff) wrote: - Hi, - Was wondering if the display liquid on a DX-394 - can be fixed? - Radio was dropped and numbers only partially - show on screen. - Thank you for your time and patience............B BD, Realistic {RadioShack} DX-394 Receiverhttp://www.dxing.com/rx/dx302.htmhttp://www.rigpix.com/rs-realistic/realistic_dx394.htm It's 10 Years old and the unique Parts like the LCD may not be available any more -and/or- The cost of the Parts and Repairs may exceed the value of Radio.http://www.mwcircle.org/res-receiver-rshackdx394.htm Search for a USED Realistic {RadioShack} DX-394 Receiver on eBayhttp://shop.ebay.com/items/?_nkw=Radio+DX-394&_fromfsb=&_trksid=m270 *. ~ RHF *. Did the glass crack? If not portions of the edge connector may have lost contact. Sometimes this can be repaired by applying increased pressure to the edges of the LCD. Additionally, Check the connections from the Driver IC to the LCD. Did a PCB trace crack or cold solder joint fail? |
#3
|
|||
|
|||
Liquid Display
No glass didn't break.
Want to thank both of you for your input see what I can do..........................B. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Liquid Rubber Product For Sealing ? | Shortwave | |||
Liquid Rubber Product For Sealing ? | Shortwave | |||
Liquid Rubber Product For Sealing ? | Shortwave | |||
TM-V7A Display | Equipment | |||
TM-V7A Display | Equipment |