Milwaukee electric tools company did NOT! have a bright idea with them
thar twist to the left removable electric power cords! I done fixed my
old Milwaukee electric drill oncet before, a bunch of years ago, now I
am workin on that thang agin!

Sure and Begora, I own bouque electric drill, but Milwaukee tools
company Screwed up on that bright idea!

There are two Milwaukee electric tools factories here in Mee see see pee
pee eye, in Jackson and Greenville, metinks I mights send them an email.
cuhulin

On Sep 24, 9:13*am, wrote:
Milwaukee electric tools company did NOT! have a bright idea with them
thar twist to the left removable electric power cords! I done fixed my
old Milwaukee electric drill oncet before, a bunch of years ago, now I
am workin on that thang agin!

Sure and Begora, I own bouque electric drill, but Milwaukee tools
company Screwed up on that bright idea!

There are two Milwaukee electric tools factories here in Mee see see pee
pee eye, in Jackson and Greenville, metinks I mights send them an email.
cuhulin

***and all this time I thought you were from Bum Ph_k Tex-Arkana by
way of Bum Ph_k ArkaDelphia...*toothless grin*

Looka here, Dudette.I know a very nice married Lady who lives in
Texarkana,Texas.Dontchoo be badmoufin Texarkana,Texas and
Texarkana,Arkansas,,, duz you hear me!?!

I done fixed my Milwaukee electric drill.I owns a few udder Milwaukee
electric drills too.One of them is a Milwaukee hammer drill and the
udder one is a Milwaukee Hole Hog electric drill.It has a gear shift
lever on it.Not even Hulk Hogan can hold on to that Milwaukee Hole Hog
electric drill if it hangs up.It would beat the crap out of anybody!

I done gots me a couple of super bright idees when I starts workin on my
house steep roof top.I am going to tie some loops in one of my lonnnng
ropes and sling the rope over my roof top, I have some big thick pieces
of square concrete, I will lay them on the ground, one of them in front
of my house, the udder one ats the back of my house, I will tie the rope
around the concrete.My big wide Klein (Klein Tools company) safety belt
I will be ahh wearing, I can hook onto the rope loops as I move up and
down on my roof top, so I can't fall off of my roof top even if I want
to.My udder super bright idee, I am going to screw a board to anudder
board abouts a foot wide and six foots long, I have some thick rubber
mats, I can cut some strips of that rubber and attatch them to the
bottom edges of the board.Thataway I will be standing level when I works
on the sides of my roof top up thar.
cuhulin

On Sep 24, 3:18*pm, wrote:
Looka here, Dudette.I know a very nice married Lady who lives in
Texarkana,Texas.Dontchoo be badmoufin Texarkana,Texas and
Texarkana,Arkansas,,, duz you hear me!?!

I done fixed my Milwaukee electric drill.I owns a few udder Milwaukee
electric drills too.One of them is a Milwaukee hammer drill and the
udder one is a Milwaukee Hole Hog electric drill.It has a gear shift
lever on it.Not even Hulk Hogan can hold on to that Milwaukee Hole Hog
electric drill if it hangs up.It would beat the crap out of anybody!

I done gots me a couple of super bright idees when I starts workin on my
house steep roof top.I am going to tie some loops in one of my lonnnng
ropes and sling the rope over my roof top, I have some big thick pieces
of square concrete, I will lay them on the ground, one of them in front
of my house, the udder one ats the back of my house, I will tie the rope
around the concrete.My big wide Klein (Klein Tools company) safety belt
I will be ahh wearing, I can hook onto the rope loops as I move up and
down on my roof top, so I can't fall off of my roof top even if I want
to.My udder super bright idee, I am going to screw a board to anudder
board abouts a foot wide and six foots long, I have some thick rubber
mats, I can cut some strips of that rubber and attatch them to the
bottom edges of the board.Thataway I will be standing level when I works
on the sides of my roof top up thar.
cuhulin * *

***cu...maybe you can do all the Distinguished Trolls a big fat favor
and find the biggest rustiest drill bit you have, lube the **** out of
it...jam it into the highest speed drill you gots, and then go find
Ph.d dufus down in them thar parts of B%tt Ph_k'n Alabamar, and see if
he'll "bend over the couch"...I'll even by the b%tt grease...Open WIDE
Ph.Dufus!!...*pickin and grinnin Afro Style*

I have a nice bare naked bicycle wheel, it's a front wheel.I am going to
wire tie it so I can chuck the axel in one of my electric drills and I
will put three zip ties around the bicycle rim and den I will try it
outs.Duz you gits what I am aimin to duz with that contraption? Iffen it
works, I will rig up sumpin better, I has a few idees.
cuhulin

On Sep 24, 9:04*pm, nurk_fred2000 wrote:
On Sep 24, 3:18*pm, wrote:





Looka here, Dudette.I know a very nice married Lady who lives in
Texarkana,Texas.Dontchoo be badmoufin Texarkana,Texas and
Texarkana,Arkansas,,, duz you hear me!?!

I done fixed my Milwaukee electric drill.I owns a few udder Milwaukee
electric drills too.One of them is a Milwaukee hammer drill and the
udder one is a Milwaukee Hole Hog electric drill.It has a gear shift
lever on it.Not even Hulk Hogan can hold on to that Milwaukee Hole Hog
electric drill if it hangs up.It would beat the crap out of anybody!

I done gots me a couple of super bright idees when I starts workin on my
house steep roof top.I am going to tie some loops in one of my lonnnng
ropes and sling the rope over my roof top, I have some big thick pieces
of square concrete, I will lay them on the ground, one of them in front
of my house, the udder one ats the back of my house, I will tie the rope
around the concrete.My big wide Klein (Klein Tools company) safety belt
I will be ahh wearing, I can hook onto the rope loops as I move up and
down on my roof top, so I can't fall off of my roof top even if I want
to.My udder super bright idee, I am going to screw a board to anudder
board abouts a foot wide and six foots long, I have some thick rubber
mats, I can cut some strips of that rubber and attatch them to the
bottom edges of the board.Thataway I will be standing level when I works
on the sides of my roof top up thar.
cuhulin * *

***cu...maybe you can do all the Distinguished Trolls a big fat favor
and find the biggest rustiest drill bit you have, lube the **** out of
it...jam it into the highest speed drill you gots, and then go find
Ph.d dufus down in them thar parts of B%tt Ph_k'n Alabamar, and see if
he'll "bend over the couch"...I'll even by the b%tt grease...Open WIDE
Ph.Dufus!!...*pickin and grinnin Afro Style*- Hide quoted text -

- Show quoted text -

You have a way with words Fred. ;-)

On Sep 25, 2:53*am, Bob Dobbs wrote:
nurk_fred2000 wrote:

***cu...maybe you can do all the Distinguished Trolls a big fat favor
and find the biggest rustiest drill bit you have, lube the **** out of
it...jam it into the highest speed drill you gots, and then go find
Ph.d dufus down in them thar parts of B%tt Ph_k'n Alabamar, and see if
he'll "bend over the couch"...I'll even by the b%tt grease...Open WIDE
Ph.Dufus!!...*pickin and grinnin Afro Style*

Sounds like the CBer known as ****head fred from Hutchinson Minnesota.

--

Operator Bob
Echo Charlie 42

***good ol bobber dobber and his trusty bong...weekends here
dobber...load up on cheap swill, get yourself a five finger discount
at the local speedy thrift mart, and go mud boggin...by the by can we
count on you to be at the Bangkok Arrest Anniversary Bash over at rec
dot knives on Jan 8th...the Distinguished Trolls will be soooooo
thrilled to see you there...*grin*

There is a liquor store (Metro Wine & Spirits, sumpin like that) just
across Highway 80 from doggy's couch.I could walk over there in about
ten minutes (one traffic light) or less.I Quit the booze (I reckon y'all
still don't believe me, I don't give a red hot sh.t if y'all don't
believe me!) last February.
cuhulin

On Sep 25, 8:31*pm, nurk_fred2000 wrote:
On Sep 25, 2:53*am, Bob Dobbs wrote:

nurk_fred2000 wrote:

***cu...maybe you can do all the Distinguished Trolls a big fat favor
and find the biggest rustiest drill bit you have, lube the **** out of
it...jam it into the highest speed drill you gots, and then go find
Ph.d dufus down in them thar parts of B%tt Ph_k'n Alabamar, and see if
he'll "bend over the couch"...I'll even by the b%tt grease...Open WIDE
Ph.Dufus!!...*pickin and grinnin Afro Style*

Sounds like the CBer known as ****head fred from Hutchinson Minnesota.

--

Operator Bob
Echo Charlie 42

***good ol bobber dobber and his trusty bong...weekends here
dobber...load up on cheap swill, get yourself a five finger discount
at the local speedy thrift mart, and go mud boggin...by the by can we
count on you to be at the Bangkok Arrest Anniversary *Bash over at rec
dot knives on Jan 8th...the Distinguished Trolls will be soooooo
thrilled to see you there...*grin*

Ole' Bonger Bob isn't even worthy enough to enjoy
the bash IMO.....on second thought.....he may.

I feel that him and The Bankok Banger may end
up as "bestest buddies-roes".....their pyschological
makeup IMO is about the same.

But Fred, I fear you are going to "water down" the
very important day of The Bash by just inviting any
num-nut....unless of course you are trolling for future
"tools"....and in that case....you will find a few here,
no doubt. ;-D