Home |
Search |
Today's Posts |
#5
![]() |
|||
|
|||
![]()
Olson wrote:
I use these things in my ceiling fans(3 per fan) only because they give the equivalent of 100 watts of light in each 60 watt fixture. The do make a hell of a buzzing noise! Some worse than others of the same brand. Sure smell when the burn out too. Anyway what I found was that if I wrap the glass shades on the fan with aluminum foil (still allows good heat transfer) and ground it to the fan case.... Voila! The buzzing stops. Those suckers sure do radiate. I only loose a minimal of light doing this. Maybe they should come with some kind of screening device/mesh packed in the package. I really don't think I need the radiation especially from three of the suckers directly over my head. "Brenda Ann" wrote in message ... People used to whine about how bad Japanese electronics was in the 50's and 60's. That was mostly jingoism, though, since most Japanese electronics was as good as US electronics (by the mid 70's, it was superior). The current crop of Chinese Junk electronics makes ANYTHING prior to 1980 look positively top notch Back in the 50's we used to have a store with a "Japanese Junk" section I could go spend my Coke Bottle money at. These days even a Made in Japan is a good find. Hell, even made in Taiwan is good. My experience so far....China====JUNK. Bill Baka |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Need GE #49 lamps | Boatanchors | |||
WTB: HP/Agilent 346A (or B) Noise Source for HP 8970A Noise Figure Meter | Homebrew | |||
Lamps? | Homebrew | |||
Lamps? | Swap | |||
Lamps? | Homebrew |