Home |
Search |
Today's Posts |
#10
![]() |
|||
|
|||
![]()
Steve wrote:
This is one of the reasons why I am gravitating toward older, tube and hybrid equipment. I have friends who have old Drakes and Kenwoods that are 30 or 40 years old and going strong (and with receivers that are as quiet as all get out, with zero processor noise). Will my relatively new Yaesu or Icom rigs still be functional in 30 years? I really, really don't think so. But those Drakes and Kenwoods probably will be if they're maintained properly. Eventually you won't be able to maintain them. For example, tubes and capacitors don't last forever, even if stored in relatively safe conditions. Tubes made in the 1960's are starting to show leakage problems, and that's good brands such as RCA. Many tubes made in the 1940's are still good after 60 years, but in 30 years they will be pushing 100. The other question is ergonomics and function. Will a radio made in the 1940's or 1950's be able to compete with the noise and other problems encountered with signals. My first shortwave radio was fished out of the trash. It was a Nordmonde (Nordmende?) AM/FM/SW portable that had been dropped and the IF transformers literally had to be glued back together. But it worked with a short wire in Philly, now would it? Will any SW radio work without a special outdoor noise canceling antenna system in 30 years? As for ergonomics, I recently aquired a Drake SPR-4. It is the best in terms of reception SW radio I have ever owned, and in terms of sound equal to the Grundig 650 I lusted after in the 1980's. Ergonimicly, by today's standards, it sucks. To tune a frequency, you have to turn a knob to select the band (a-h), the crystal (1 of 14) and then tune the preselector. Only then can you spin the frequency dial to tune in a station. The preselector is narrow enough that you have to tweak it after about 100kHz, which is really annoying scanning the AM broadcast band. This is fine for me, I like to pick a band and tune around, but can you imagine someone who is used to direct frequency entry and memories using it? It would drive them nuts. While the chance of either of my younger sons becoming a ham or even SWL is pretty small, I expect that neither of them will ever show any interest in it, except maybe for looks. Geoff. -- Geoffrey S. Mendelson, Jerusalem, Israel N3OWJ/4X1GM |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Still Waiting... AOR AR7070 | Shortwave |