Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old February 15th 10, 04:37 AM posted to rec.radio.shortwave
external usenet poster
 
First recorded activity by RadioBanter: Jun 2009
Posts: 635
Default Recommendations - 12 / 13.8v Power Supply, ~ 5 amp?

On Feb 14, 10:15*am, "D. Peter Maus"
wrote:
On 2/14/10 07:11 , Gregg wrote:





On Feb 12, 11:29 am, "D. Peter
wrote:
On 2/12/10 10:13 , bpnjensen wrote:


Pyramids are not especially popular with the Amateur Radio crowd:


http://www.eham.net/reviews/products/20


So I have noticed! *But the Astrons, in general, have a loyal
following.


* * I did some research into the Pyramid supplies. As I said earlier,
they were not built for continuous service. Apparently, at any load.
Shame, too. With modification, they can be a pretty decent supply.


* * Apparently Pyramid has been taking design tips for ICOM.


* *


Ah Ha then, maybe dear old former friend wasn't lying then about
modding them. He was always modding something when I was over at the
shop. *He sure wanted them back pretty bad. Tough. :-I


* *They're nice supplies. And as you pointed out, you DID work CB
off of one for a couple of years without issue. But that was
intermittent service, which is what most of these supplies are built
for.

* *Most any supply will work for most applications. It's continuous
draw that does them in. But that's not a surprise. ICOM's, like R71,
R7000, R7100 are renowned for running so damned hot that the back
panel can be too hot to touch. Even the factory recommends going in
periodically and touching up solder joints, checking components for
heat damage.

* *And ICOM"s not the only one. But that doesn't mean it's not poor
design.

* *Which CB rig were you running, and what type of antenna did you use?- Hide quoted text -

- Show quoted text -


Nothing awe inspiring Peter, it was part of six pieces I ran in my
"fun car."
148GTL (old version) with the slider and 50 watt final with the extra
channel kit . I have a homebrewed modulator box ( from a firefighter
friend) that I coupled with it when it was in the car. The mod box
wasn't really a linear ( though some may call it that) it wasn't
really to talk further miles wise - - but it really cleared up the
voice - almost like a speach processor if that makes sense. Ninety
nine percent of the time I would talk on sideband, I really enjoy
having the slider because I could tell a buddy to meet me at a
specific freq ( he has the same type of radio) - and it would be
absolutely crystal clear - crystal. At times I can talk all over the
world when the skip rolls, my funnest time was when I spoke to a
gentleman in Trinidad West Indies - in his accent he told me "Unit 67
- you're sounding like a local out here." Fun times.:-) I can just
imagine getting my ticket and actually legally be able to have a cup
of coffee with someone in Guam. I also have the 29LTD Classic - all
tricked out. Ha!


Antenna wise I have the Antron with the ground plane radials at the
bottom. I also have a big yagi antenna up there but it's not quite
setup the way I would like it - coax wise and not having a rotor at
the present. How can someone not love this entire hobby is beyond me.
I just wish the CB Newsgroup wasn't trashed like it is. You're a Ham I
would assume Peter?
  #2   Report Post  
Old February 15th 10, 05:59 AM posted to rec.radio.shortwave
external usenet poster
 
First recorded activity by RadioBanter: Jun 2009
Posts: 635
Default Recommendations - 12 / 13.8v Power Supply, ~ 5 amp?

On Feb 15, 12:41*am, Bob Dobbs wrote:
Gregg wrote:
I just wish the CB Newsgroup wasn't trashed like it is.


Just ignore all the homophobic flames
and post as if you're the only person there.

--

Operator Bob
Echo Charlie 42


I should take your advice Bob. I do - from time to time go over there
and lurk and it seems like there are no threads about CB/Antennas,
there used to be some pretty informative (at least for IMO) threads.

  #3   Report Post  
Old February 16th 10, 12:42 AM posted to rec.radio.shortwave
external usenet poster
 
First recorded activity by RadioBanter: Jun 2009
Posts: 635
Default Recommendations - 12 / 13.8v Power Supply, ~ 5 amp?

On Feb 15, 4:35*am, Bob Dobbs wrote:
Gregg wrote:
On Feb 15, 12:41 am, Bob Dobbs wrote:
Gregg wrote:
I just wish the CB Newsgroup wasn't trashed like it is.


Just ignore all the homophobic flames
and post as if you're the only person there.


--


Operator Bob
Echo Charlie 42


I should take your advice Bob. I do - from time to time go over there
and lurk and it seems like there are no threads about CB/Antennas,
there used to be some pretty informative (at least for IMO) threads.


OK, I'll put an antenna related post up over there.

--

Operator Bob
Echo Charlie 42- Hide quoted text -

- Show quoted text -


Ha! That was funny. I'll check later on, make it a good one and we'll
see what happens.;-)
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FA linear power supply with toroid power xformer jeff Equipment 0 March 19th 06 07:07 AM
Wtb: hp-23 power supply John Swap 0 November 20th 05 04:20 AM
WTB: HV POWER SUPPLY AL G. Swap 0 October 5th 04 04:30 AM
Astron RS-20A Power Supply Great Condition - used to power a VHF radio Les Smith Swap 5 October 16th 03 09:47 AM
Need help w/ Power Supply TRAMD300 Swap 0 July 27th 03 06:03 AM


All times are GMT +1. The time now is 05:17 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017