I put my Drake in my Library beside my great chair, Got to tap into the
antenna system today and I can DX from there.

Still have the Sat 800 in my office.

On Nov 2, 6:34*pm, "Just Plan Burr" wrote:
I put my Drake in my Library beside my great chair, Got to tap into the
antenna system today and I can DX from there.

Still have the Sat 800 in my office.

RF Systems SP-1 Splitter/Combiner
http://www.universal-radio.com/catal...s/1420spec.jpg

Apex SPL-2 Splitter/Combiner
http://www.universal-radio.com/catal...amps/5043.html

MC-5030 Model {Bob's America}
http://www.bobsamerica.com/multicoupler.html

SWL "HF" Receive Antenna Splitter
http://www.qrp.pops.net/swl-ant-split.asp

If you SWL Antenna is over 50 Foot long and 100
Feet would be better. You could build your Two
Step 'Passive' Antenna Splitter

1ST - A 1:1:1 Splitter out-side the House or at
the entry to the House : Three Colored Bundled
Wires {all the same length and number of turns}
Wrapped around and through a Ferrite Toroidal
Core [Donut] for an Isolation "Splitter" going
to the two Radios. One-Coax Connector "In" for
Antenna & Ground -and- Two-Coax Connectors "Out"
going to the Radios.

2ND - Run the Coax to your Radios and use a 9:1
Matching Transformer between each of the Radios
and the Coax Cable feeds.

-or- You can also make your own 9:1 Matching
Transformers by using a Two Colored Wires Wrapped
around and through a Ferrite Toroidal Core [Donut]
with One Wire having 30 Turns and the other Wire
having 10 Turns.

DIY should cost you less than $25/$50 ?

burr - hope this helps - iane ~ RHF

"RHF" wrote in message
news:7cf3cde9-11af-435c-abda-
DIY should cost you less than $25/$50 ?

burr - hope this helps - iane ~ RHF