Sometimes Jacks can get bent out of shape a little bit, that little
dogleg shaped part of the jack.It has happened to me before.
cuhulin

"D. Peter Maus" wrote in message
...
On 1/13/11 15:21 , Jim wrote:
On Sun, 09 Jan 2011 10:46:38 -0800, wrote:


The problem with these pin connectors is more often than not an issue
with the plug. Replacement is simple, once you've located the correct
size. Cost will be around a buck and a half, perhaps a bit more. And
replacement is not difficult.


I'll second that, the wire to plug went open on mine.
Also, the jack contacts could be dirty. Try to cleaning.