| Home |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
I'm wondering if anyone can help me track down a problem with a SW radio
I just bought at a garage sale? It's a Panasonic RF-B300 (portable), and when I tested it at the garage sale all bands worked fine. But when I brought it home the MW band would just barely pick up my local station and nothing else (HF and FM still worked fine). I took the back off to check for loose wires on the ferrite antenna, but everything looked OK. In fact, everything inside looked really solidly built on this radio. I put it back together, and when I turned it on the MW band was working loud and clear, picking up stations from all over. I turned it off, but half an hour later the MW was dead again (except for our local station). I hadn't moved it or bumped it in the time between when it was working and when it wasn't. Does anyone have any ideas of what could be wrong? Like I said, the HF and FM bands work fine, and the MW band can barely pick up my local station (but nothing else). Here's a link to some info on this receiver: http://www.dxing.com/rx/rfb300.htm Thanks, Dave. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FA: EXCELLENT Condition - PANASONIC AG-1980P S-VHS VCR Desktop Video Editor - Out-of-Box New | Equipment | |||
| FA: MINT Condition PANASONIC AG-EZ1 Mini-DV Camcorder | Equipment | |||
| I need a schematic for a Panasonic RJ3600 40 ch. base | CB | |||
| Panasonic 4900 vs. FRG 7 | Shortwave | |||
| Panasonic schematic needed | Shortwave | |||