LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Old November 15th 03, 01:19 AM
Stinger
 
Posts: n/a
Default

The reason I prefer a true Uninterruptable Power Supply (UPS) instead of a
surge protector is that I've seen my UPS switch over to metered battery
power up to two seconds before I see a flash of lightning (or hear close
thunder). I would think that this "switching over," effectively cutting
out the overloaded circuit, is a much better method of protection than
trying to dampen a big lightning (or other) surge as the surge protectors
do.

-- Stinger

"elfa" wrote in message
...
In article , tommyknocker says...

Gray Shockley wrote:

On Thu, 13 Nov 2003 21:35:20 -0600, tommyknocker wrote
(in message ):

Stinger wrote:

Our local Sam's Club has APC 1100's for $89.00. They're capable of
protecting a LOT of equipment, but overkill for just one radio.

I'm not a member. This particular surge protector is hooked to all my
computer equipment plus a clock, a shredder and a phone.


A shredder?


I can't cite anyone else but I sure wouldn't hook something with a

motor up
to the same serge suppresser to which I have computer and phone

equipment.

Why?

Motors can take extra current to start up....that can feed into anything

else
plugged into the same circuit.

I used to work as a computer network consultant. A client kept blowing

out one
of their hubs. I traced it to a electric pencil sharpener plugged into

the same
wall plug as the hub. Everytime someone sharpened their pencil, a surge

of
current was also placed on the hubs circuit. They had blown out 3 hubs in

a
month. We just moved the sharpener to another location and the prob

stopped.

elfa



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Noise Figure Measurements Steve Kavanagh Homebrew 25 October 20th 04 04:14 AM
Need a low noise VXO for narrow sweep J M Noeding Homebrew 26 June 18th 04 04:39 AM
WTB: HP/Agilent 346A (or B) Noise Source for HP 8970A Noise Figure Meter Carl R. Stevenson Homebrew 0 January 21st 04 04:20 AM
Automatic RF noise cancellation and audio noise measurement Dave Shrader Homebrew 35 August 11th 03 01:07 AM
CCIR Coefficients METHOD 6 REC533 // AUCKLAND --> SEATTLE http://CBC.am/ Shortwave 0 July 16th 03 08:21 AM


All times are GMT +1. The time now is 11:43 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017