Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
hi Eric:
honestly i was trying to help. if you hook a large air-core air-cap [high- Q] tuned loop to your RX340 you should be very happy with the results on LW. you are correct, DR is not a big issue with this setup. if you hate the R75 that is fine. one of the best out of the box units is the R8B. people who say one cannot program listen or DX with the [insert tabletop name here] are full of it. i've done experiments bearing this out. the tabletops are more similar than they are different. buy whatever suits your fancy and use the best antenna possible. i will call a spade a spade. the 7030 and 6790 have high IP3 mixers. AFA that 1000' antenna: 670-kHz is 3/4 wavelengths resonant at 1099'. radios are going to suffer from overload. i suggest trying a series-resonant trap that: this should dump much of that 670-kHz energy to ground before it enters the radio. regards, phil ![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Icom 730 zero-beat question | General | |||
Icom 730 preventative maintenance question | Equipment | |||
Icom 730 preventative maintenance question | Equipment | |||
Newbie question: icom ic-r7000 | Scanner | |||
question ICOM PCR-1000 | Equipment |