i don't know who on this list suggested to unplug the cable modem to see if
it made a difference in the noise level on my receiver.
well i tried it last night and what a difference!!! from s-8 to s-6.
so i then tried 3 ferrite chokes on it and that cleared all the noise from
that!

then i changed my co-ax from just regular cable t.v. co-ax to some well
shielded direct burial co-ax and that took noise down from s-6 to s-3.

so far there seams to be no negative side affects from these changes.(loss
of signal)

now if i could just get ride of the noise from my computer monitor, i have
tried chokes with no change in noise level.
i guess the best thing to do is get a l.c.d. monitor, but thats just too
expensive right now!

many thanks to all that have helped with all my questions

charles foster
r8b
vr-5000
frg-7700
dx-394
ar-88

Charles:

This may sound odd, ( & look odd whilst doing it, ) but it does work:
Wrap silver duct tape around all the antenna lead-ins; it cuts down on Noise
considerably;

Try wearing headphones & tune to a SW station while you do this; You can
actually hear the noise " Go Away"

Dan


In article , "chuck"
writes:

Subject: noise
From: "chuck"
Date: Mon, 29 Dec 2003 15:35:08 -0500

i don't know who on this list suggested to unplug the cable modem to see if
it made a difference in the noise level on my receiver.
well i tried it last night and what a difference!!! from s-8 to s-6.
so i then tried 3 ferrite chokes on it and that cleared all the noise from
that!

then i changed my co-ax from just regular cable t.v. co-ax to some well
shielded direct burial co-ax and that took noise down from s-6 to s-3.

so far there seams to be no negative side affects from these changes.(loss
of signal)

now if i could just get ride of the noise from my computer monitor, i have
tried chokes with no change in noise level.
i guess the best thing to do is get a l.c.d. monitor, but thats just too
expensive right now!

many thanks to all that have helped with all my questions

charles foster
r8b
vr-5000
frg-7700
dx-394
ar-88

DAN,

Are you talking about plain old silver duck tape ?

Or, the shinny Aluminum Foil (Metal) Tape ?

iwtk ~ RHF
..
..
= = = (Diverd4777)
= = = wrote in message ...
Charles:

This may sound odd, ( & look odd whilst doing it, ) but it does work:
Wrap silver duct tape around all the antenna lead-ins; it cuts down on Noise
considerably;

Try wearing headphones & tune to a SW station while you do this; You can
actually hear the noise " Go Away"

Dan


In article , "chuck"
writes:

Subject: noise
From: "chuck"
Date: Mon, 29 Dec 2003 15:35:08 -0500

i don't know who on this list suggested to unplug the cable modem to see if
it made a difference in the noise level on my receiver.
well i tried it last night and what a difference!!! from s-8 to s-6.
so i then tried 3 ferrite chokes on it and that cleared all the noise from
that!

then i changed my co-ax from just regular cable t.v. co-ax to some well
shielded direct burial co-ax and that took noise down from s-6 to s-3.

so far there seams to be no negative side affects from these changes.(loss
of signal)

now if i could just get ride of the noise from my computer monitor, i have
tried chokes with no change in noise level.
i guess the best thing to do is get a l.c.d. monitor, but thats just too
expensive right now!

many thanks to all that have helped with all my questions

charles foster
r8b
vr-5000
frg-7700
dx-394
ar-88

RHF wrote:

DAN,

Are you talking about plain old silver duck tape ?

Or, the shinny Aluminum Foil (Metal) Tape ?

Probably the shiny aluminium foil tape, you know, the kind of stuff some people
fashion hats with.



iwtk ~ RHF
.
.
= = = (Diverd4777)
= = = wrote in message ...
Charles:

This may sound odd, ( & look odd whilst doing it, ) but it does work:
Wrap silver duct tape around all the antenna lead-ins; it cuts down on Noise
considerably;

Try wearing headphones & tune to a SW station while you do this; You can
actually hear the noise " Go Away"

Dan


In article , "chuck"
writes:

Subject: noise
From: "chuck"
Date: Mon, 29 Dec 2003 15:35:08 -0500

i don't know who on this list suggested to unplug the cable modem to see if
it made a difference in the noise level on my receiver.
well i tried it last night and what a difference!!! from s-8 to s-6.
so i then tried 3 ferrite chokes on it and that cleared all the noise from
that!

then i changed my co-ax from just regular cable t.v. co-ax to some well
shielded direct burial co-ax and that took noise down from s-6 to s-3.

so far there seams to be no negative side affects from these changes.(loss
of signal)

now if i could just get ride of the noise from my computer monitor, i have
tried chokes with no change in noise level.
i guess the best thing to do is get a l.c.d. monitor, but thats just too
expensive right now!

many thanks to all that have helped with all my questions

charles foster
r8b
vr-5000
frg-7700
dx-394
ar-88

N8KDV,

Hey, I have been told that I: Look Great in a HAT !

And the Duck Tape "Sticks" to my old 'balding' head.

jftfoi ~ RHF
..
..
= = = N8KDV
= = = wrote in message ...

RHF wrote:

DAN,

Are you talking about plain old silver duck tape ?

Or, the shinny Aluminum Foil (Metal) Tape ?

Probably the shiny aluminium foil tape, you know, the kind of stuff some people
fashion hats with.



iwtk ~ RHF
.
.

In article , Plain old silver
Duct tape;
- Use some of the shiny stuff as well; but the regular grey / silver duct tape
woks quite well..

(RHF) writes:


DAN,

Are you talking about plain old silver duck tape ?

Or, the shinny Aluminum Foil (Metal) Tape ?

iwtk ~ RHF
.

if i disconnect my antenna from the co-ax that goes to my radio, all of the
static from my computer goes away, so i guess i should just shut off the
monitor when i want to use my radio.

chuck

"Diverd4777" wrote in message
...
In article , Plain old
silver
Duct tape;
- Use some of the shiny stuff as well; but the regular grey / silver duct
tape
woks quite well..

(RHF) writes:


DAN,

Are you talking about plain old silver duck tape ?

Or, the shinny Aluminum Foil (Metal) Tape ?

iwtk ~ RHF
.

Give some details of your system. If things are set up right, the noise from
your monitor should not make any difference. Where is your antenna in
relation to your monitor? Is the coax shield grounded?
"chuck" wrote in message
...
if i disconnect my antenna from the co-ax that goes to my radio, all of
the
static from my computer goes away, so i guess i should just shut off the
monitor when i want to use my radio.

chuck

"Diverd4777" wrote in message
...
In article , Plain old
silver
Duct tape;
- Use some of the shiny stuff as well; but the regular grey / silver
duct
tape
woks quite well..

(RHF) writes:


DAN,

Are you talking about plain old silver duck tape ?

Or, the shinny Aluminum Foil (Metal) Tape ?

iwtk ~ RHF
.

if i disconnect my antenna from the co-ax that goes to my radio, all of the
static from my computer goes away, so i guess i should just shut off the
monitor when i want to use my radio.

Yeppers.

Bill, K5BY