Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Ron Hardin wrote in message ...
Who carries 0.65mm ID x 2.75mm OD power cords? (plug on one end and tinned wire on the other) For a couple of Radio Your Way's, to a D battery pack. Buying the wall wart and snipping off the cord seems wasteful. The wall wart is okay but stops working if the power goes off. Try your local "Goodwill" or other "thrift" store. You can often pick up odd volataged wallwarts for $0/25~$1.00. "Flea markets" are another great place to find wallwarts. make a gauge to measure the OD and use a finishing nail to measure the ID. I use a Drill gaueg for the OD, and went through a bunch of different nails to get one for each size I need. Terry |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Wanted: Power Supply for TR-4C | Equipment | |||
Wanted: Power Supply for TR-4C | Equipment | |||
Wanted: Power Supply for TR-4C | Equipment | |||
FS: Connectors, Antennas, Meters, Mounts, etc. | Antenna |