LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #14   Report Post  
Old March 4th 04, 09:40 PM
starman
 
Posts: n/a
Default

Nicolae Santean wrote:

*** post for FREE via your newsreader at post.newsfeed.com ***

Now you've got me thinking... :-) I have two Grundig portables, a YB400 and
an S350 and the YB comes with some earphones (which although sound
reasonable, I don't like - I don't like ear buds). But now, here is my
puzzle: what is the recommended earphone impedance for those radios? I
couldn't find it specified anywhere! Is there some sort of standard one? If
yes, do all earphones on the market have that same impedance?

And about the response frequency, it appears that hifi earphones are not
suitable for SWL. What is the suitable frequency range then? (70Hz-11KHz
maybe?) Back in high school, I used to use (tele)phone speakers quite
successfully in my DYI HF projects. But then we had phones with detachable
speakers ... They were with very narrow audio response and with quite a
high impedance (500Ohms ?).

Nic.
http;//www.csd.uwo.ca/~nic

"tommyknocker" wrote in message
...
I am SO frustrated. For the second day in a row I've been unable to make
out Radio Exterior de Espana's newscast over the speaker of my FRG8800.
I've tried SSB (cuts down the static), the tone and the attenuator but
they seem to be just below audibility level. I'm gonna follow some
advice I was given here a couple weeks ago about using headphones. But I
want to get good quality ones, not cheap jogger's ear buds. What brands
of headphones do you guys use?


The impedance of the headphones for a shortwave receiver is not that
important, providing they are not high impedance, such as several
hundred ohms, which would significantly lower the volume. Most
headphones will be below 50-ohms. As for the frequency range, shortwave
broadcasters don't transmit much audio above about 5-Khz, so that would
be a good top end for the headphone response. This is well below the
full fidelity range of Hi-Fi headphones, which is why they are not a
particularly good choice for shortwave, unless you have significant
hearing loss on the high frequency end of the audio spectrum.


-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
900mhz Wireless headphones Jglassaz General 1 August 13th 04 11:25 PM
Sensifivity of 2000-ohm Headphones Reg Edwards Antenna 40 July 4th 04 08:02 AM
Sensifivity of 2000-ohm Headphones Reg Edwards Antenna 0 July 1st 04 08:43 PM
Holtzer Cabot headphones Totalrod Boatanchors 0 January 9th 04 02:08 AM
Holtzer Cabot headphones Totalrod Boatanchors 0 January 9th 04 02:08 AM


All times are GMT +1. The time now is 07:34 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017