Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]()
Ephraim wrote:
I'm less than a newbie. I have no radio or experience and am wondering what the ins and outs are. The idea of conversing with people all over the place sounds very interested. Can someone give me some feedback on how it works, what kind of range there is, general ideas about the $$ involved, and a few things I'm too ignorant to ask? I know there is a broad range but I have to start somewhere. I think what you're looking for is "amateur" or "ham" radio. The suggestion to start at http://www.arrl.org is a good one. In theory this newsgroup is for those listening to international broadcasts (and not talking back) but there's a lot of overlap. Amateur radio requires a license. I'm making the educated guess from your post's headers that you're in the USA. Here, a license that allows operation on the international HF frequencies requires passing a simple written test and a 5wpm (VERY slow!) Morse Code exam. The Morse requirement is likely to be deleted in the next two years (or sooner), though there are real advantages to knowing Morse even if it's not required by the government. Already, you can obtain a "Technician Class" license without passing a Morse exam. This allows operation on VHF and UHF frequencies. On these frequencies communications throughout your metropolitan area are possible; sporadic nationwide communications are possible on the 50MHz band. (and potentially worldwide but you'll have to wait for an 11-year atmospheric cycle to come around) The licensing exams are given by local radio clubs, often at annual hamfests. The arrl.org site has lists of local clubs and examination schedules, as well as outlines of the written tests. There is no fee payable to the FCC for a ham license, but there is a modest ($10 IIRC) examination fee. Range is potentially worldwide. That is somewhat dependent on atmospheric conditions and the quality/size of antenna you're able to install. Contacts throughout North America are very possible with simple antennas, poor conditions, and low power. A basic ham station consists of a "transciever", a power supply for that transciever, a microphone (and Morse key?), an antenna, and "leadin" cable to connect the antenna to the transciever. Good quality transcievers can be purchased new for as little as about $700; used gear is of course cheaper. A decent power supply will run about $150, or you can use a car battery if you have a safe place to store it and a safe way to charge it. A microphone is usually included with the transceiver. A wire antenna can be home-made from parts available in the wiring department of Home Depot for less than $50. You'll have to get the leadin cable elsewhere though (probably the same place you buy a transceiver), $50 should probably cover that too. So I'd say just shy of $1,000 to get started with new gear. You will need some space for the antenna. How much space determines how many of the frequency bands available to hams you're able to efficiently use. A 260-foot antenna may be necessary to use the very lowest-frequency band available, while 20 feet is plenty for the highest band. There are ways of getting on with something smaller (many hams operate from their cars) though they're somewhat more expensive and less efficient. -- Doug Smith W9WI Pleasant View (Nashville), TN EM66 http://www.w9wi.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
couple more short wave radio questions | Shortwave | |||
A great short wave pirates group on internet | Shortwave | |||
Short Wave Magazine"...special | Shortwave | |||
Short Wave above 25MHZ | Shortwave |