Home |
Search |
Today's Posts |
#12
![]() |
|||
|
|||
![]()
Howard wrote:
On Mon, 21 Jun 2004 03:25:46 GMT, m II wrote: Kees wrote: Hello fellow shortwave listeners ! More info to make a T2FD yourself, like I did mine, please have a look at: http://members.home.nl/rita.kees/t2fdmake.html I hope you can appreciate it and use it for your practice. I will be glad to answer your questions. 73/cheers Kees http://members.home.nl/rita.kees/t2fd1.gif I found that my garage is WAY to far away to use this setup. Following the formula, I took an average frequency of 10 Megahertz. I divided into 100, as per the formula. I got an antenna length of (100ft/10,000,000) = 1 X 10^-5 feet, or 0.00012 inches. I then thought that this just couldn't be right. I redid it using Meters instead of feet and arrived at 0.00001 meters length. MUCH BETTER! The problem now is that the store only sells full length rolls of wire. Where can I mail order a smaller chunk? Can they just wrap the postage stamp around it to save shipping costs? Being ever on the watch for cheap alternatives, what is a cheap way of relocating the far end antenna support? I don't want to pay to have the garage moved. Any insights appreciated. mike In the event that you are not just being sarcastic, here's a link that may help. http://www.hard-core-dx.com/nordicdx.../t2design.html Thank you, but now I have to cancel the building movers. mike (Are the numbers REALLY better on this site or is it just a plot by the copper wire conglomerates to sell more product? g). ================================================= 1. The length of each leg ("A'') from the center is equal to 50,000 divided by the lowest desired operating frequency (in kHz) and then multiplied by 3.28. The answer is in feet. 2. The spacing between radiating wires ("B") is equal to 3000 divided by the lowest desired operating frequency (in kHz) and then multiplied by 3.28. The answer is in feet. 3. The sloping angle for a non*directional pattern should be on the order of 30, but 20–40 is acceptable. http://www.hard-core-dx.com/nordicdx.../t2design.html ================================================= -- __ __ __ __ __ __ __ __ / /\ / /\ / /\ / /\ / /\ / /\ / /\ / / / /\ \/ /\ \/ /\ \/ / /_/ \/_/ \/_/ \/_/ \/_/ \/_/ \/_/ \/_/ ..let the cat out to reply.. ©Densa International 'Think tanks cleaned cheap' |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
New ARRL Proposal | Policy | |||
MAKE 5000.00 PER WEEK | Antenna |