dxAce wrote:

Ken Wilson wrote:

Am I the only one who is getting ready to stop listening to RCanadaI because
of the horrible broadcast quality. Hum is terrible & audio is distorted.
13.655 mhz is strongest here in KY but that means I hear more Hum.

Sounds pretty good here. Good signal.

I do hear a bit of hum on certain broadcast items though.



dxAce

"dxAce" wrote in message
...


dxAce wrote:

Ken Wilson wrote:

Am I the only one who is getting ready to stop listening to RCanadaI
because
of the horrible broadcast quality. Hum is terrible & audio is
distorted.
13.655 mhz is strongest here in KY but that means I hear more Hum.

Sounds pretty good here. Good signal.

I do hear a bit of hum on certain broadcast items though.

dxAce


Powerful, clear and excellent sounding signal here.

Jack
Virginia Beach VA

Jack Painter wrote:

"dxAce" wrote in message
...


dxAce wrote:

Ken Wilson wrote:

Am I the only one who is getting ready to stop listening to RCanadaI
because
of the horrible broadcast quality. Hum is terrible & audio is
distorted.
13.655 mhz is strongest here in KY but that means I hear more Hum.

Sounds pretty good here. Good signal.

I do hear a bit of hum on certain broadcast items though.

dxAce


Powerful, clear and excellent sounding signal here.

I was using one of the R8B's and can detect a bit of hum when no audio is
being transmitted. I turned on the R7 and using the 8 kHz filter the hum is a
bit more apparent, but not really noticing any distortion.

dxAce

The Hum is there @ 1440 on 13.655. The distortion went away around 1418. The
Hum at that time was more of a Buzz than a Hum.
Must just be my crappy receivers G

73, Ken

dxAce wrote in message
...


Jack Painter wrote:

"dxAce" wrote in message
...


dxAce wrote:

Ken Wilson wrote:

Am I the only one who is getting ready to stop listening to
RCanadaI
because
of the horrible broadcast quality. Hum is terrible & audio is
distorted.
13.655 mhz is strongest here in KY but that means I hear more Hum.

Sounds pretty good here. Good signal.

I do hear a bit of hum on certain broadcast items though.

dxAce


Powerful, clear and excellent sounding signal here.

I was using one of the R8B's and can detect a bit of hum when no audio is
being transmitted. I turned on the R7 and using the 8 kHz filter the hum
is a
bit more apparent, but not really noticing any distortion.

dxAce

"Ken Wilson" wrote in message
...
The Hum is there @ 1440 on 13.655. The distortion went away around 1418.
The
Hum at that time was more of a Buzz than a Hum.
Must just be my crappy receivers G

73, Ken


At 1700 EDT I'm getting too many stronger stations on both sides to hear
13655 well.

Jack

dxAce wrote in message
...


Jack Painter wrote:

"dxAce" wrote in message
...


dxAce wrote:

Ken Wilson wrote:

Am I the only one who is getting ready to stop listening to
RCanadaI
because
of the horrible broadcast quality. Hum is terrible & audio is
distorted.
13.655 mhz is strongest here in KY but that means I hear more
Hum.

Sounds pretty good here. Good signal.

I do hear a bit of hum on certain broadcast items though.

dxAce


Powerful, clear and excellent sounding signal here.

I was using one of the R8B's and can detect a bit of hum when no audio
is
being transmitted. I turned on the R7 and using the 8 kHz filter the hum
is a
bit more apparent, but not really noticing any distortion.

dxAce

Jack Painter wrote:

"Ken Wilson" wrote in message
...
The Hum is there @ 1440 on 13.655. The distortion went away around 1418.
The
Hum at that time was more of a Buzz than a Hum.
Must just be my crappy receivers G

73, Ken


At 1700 EDT I'm getting too many stronger stations on both sides to hear
13655 well.

RCI is not currently using 13655 at 1700 EDT (2100 GMT).

dxAce

dxAce wrote:

Jack Painter wrote:

"Ken Wilson" wrote in message
...
The Hum is there @ 1440 on 13.655. The distortion went away around 1418.
The
Hum at that time was more of a Buzz than a Hum.
Must just be my crappy receivers G

73, Ken


At 1700 EDT I'm getting too many stronger stations on both sides to hear
13655 well.

RCI is not currently using 13655 at 1700 EDT (2100 GMT).

Try 17765.



dxAce