Home |
Search |
Today's Posts |
#1
![]() |
|||
|
|||
![]()
Hiya.....
For about a year, I have been considering buying a new tabletop sw rig. I currently use the R-75, and I was thinking of getting a DSP radio. After reading some receiver comparison reviews of radios like the NRD-545 and getting other advice from people on this ng, I became more and more interested in the IC-746Pro. It seems to be an amazing DSP DX'ing rig. I also know about the reported problems with the transmitter, but I'm not so worried about that. It can be fixed. Up until now, I have not been interested in transmitting as an amateur. Just sw listening. I figure, if I am going to get an IC-746Pro, I might as well look into getting a ham license. It might be fun.... I read a few links about the multiple choice tests for the tech license and I also saw a list of pool. My question is... How much of an ordeal is it to get set up to take the test itself ??? Michael |
#2
![]() |
|||
|
|||
![]() "Michael" wrote in message t... I read a few links about the multiple choice tests for the tech license and I also saw a list of pool. My question is... How much of an ordeal is it to get set up to take the test itself ??? The Tech license study will take the average person about 2-4 weeks to get through, depending on how much time you have. It is not a difficult test, even if one isn't really technically inclined. The Tech study manual covers mostly basic material, and you won't need more than middle-school math abilities to do the calculations required in the exam. However, you won't be able to transmit on the SW bands until you upgrade to the General class. That's another whole study guide and test. The General Class study guide covers much of the same stuff the Technician guide does, but in more depth, and there is more about RF exposure and antennas. You also need to pass a 5 words per minute Morse Code receiving exam for the General license. Many people expect the Morse Code exam to be dropped in the near future, but I wouldn't hold my breath waiting for the FCC to approve its demise. Some people have taken both the Technician and General licenses at once. Each of these tests consists of 35 questions, and the test is multiple choice. And the 5 wpm Morse Code test is really pretty easy to pass too. There are good practice exams at the following websites: www.eham.net and www.qrz.com. The best study guides (IMHO) are the ARRL manuals. The Tech study guide is the Now You're Talking! 5th edition, which contains lessons and the current test question and answer pools. The General Class Manual is also available from ARRL, as are Morse Code practice CDs and tapes. Their website is he www.arrl.org/catalog. Good luck! Jackie |
#3
![]() |
|||
|
|||
![]()
Michael,
Just in case you are not aware of these articles about using the IC-746Pro as a SWL DXing rig, check out these informative piece: http://www.kongsfjord.no Look under "The Dallas Files" and you'll see the IC-746Pro review. http://www.dxing.info/equipment/icom_ic746_mjelde.pdf This one is a follow-up to the above article. 73, Guy Atkins Puyallup, WA USA "Michael" wrote in message t... Hiya..... For about a year, I have been considering buying a new tabletop sw rig. I currently use the R-75, and I was thinking of getting a DSP radio. After reading some receiver comparison reviews of radios like the NRD-545 and getting other advice from people on this ng, I became more and more interested in the IC-746Pro. It seems to be an amazing DSP DX'ing rig. I also know about the reported problems with the transmitter, but I'm not so worried about that. It can be fixed. Up until now, I have not been interested in transmitting as an amateur. Just sw listening. I figure, if I am going to get an IC-746Pro, I might as well look into getting a ham license. It might be fun.... I read a few links about the multiple choice tests for the tech license and I also saw a list of pool. My question is... How much of an ordeal is it to get set up to take the test itself ??? Michael |
#4
![]() |
|||
|
|||
![]()
Well, in 1952 (this may be out of date) the Tech and General exams
were the same except Tech didn't have any code or privileges, and there was a nifty Novice test with 5wpm code nonrenewable that lasted a year, for you to get your code speed up to the General's 13wpm. If you didn't go on the air over that time in code, you had a tough time meeting the code requirement. If you did, it was easy. Anyway judging from the experience of a typical child and his father following these two paths. Then it all started going downhill and God only knows what it is today. I don't even know what the power limits or bands are. We used to have a nifty KW into a backyard antenna, after years of sultry upgrades, and sending code would dim the lights and shrink TV pictures. You could pass any written test by memorizing the ARRL's License Manual but code was apparently the killer for grownups. -- Ron Hardin On the internet, nobody knows you're a jerk. |
#5
![]() |
|||
|
|||
![]()
Don't waste your money on the license, it is just a formality. It's like
driving without one. No big deal. Jari Savolainen "Michael" wrote in message t... Hiya..... For about a year, I have been considering buying a new tabletop sw rig. I currently use the R-75, and I was thinking of getting a DSP radio. After reading some receiver comparison reviews of radios like the NRD-545 and getting other advice from people on this ng, I became more and more interested in the IC-746Pro. It seems to be an amazing DSP DX'ing rig. I also know about the reported problems with the transmitter, but I'm not so worried about that. It can be fixed. Up until now, I have not been interested in transmitting as an amateur. Just sw listening. I figure, if I am going to get an IC-746Pro, I might as well look into getting a ham license. It might be fun.... I read a few links about the multiple choice tests for the tech license and I also saw a list of pool. My question is... How much of an ordeal is it to get set up to take the test itself ??? Michael |
#6
![]() |
|||
|
|||
![]()
On Thu, 09 Sep 2004 10:18:06 +0000, Jari Savolainen wrote:
I read a few links about the multiple choice tests for the tech license and I also saw a list of pool. My question is... How much of an ordeal is it to get set up to take the test itself ??? Michael It's no big deal, go to the ARRL site and they have a section where you can locate local ham clubs. Make a few calls and you'll find a club that tests, usually at hamfests or ham radio classes. You can do it, get the book "Now your talking", study it for a month or so and go for it. |
#7
![]() |
|||
|
|||
![]()
"Ordeal?"
The ham license is now far less challenging than putting money in a parking meter. You've got the code crybabies and corporate charlatans to thank for that. Smokey "Michael" wrote in message t... Hiya..... For about a year, I have been considering buying a new tabletop sw rig. I currently use the R-75, and I was thinking of getting a DSP radio. After reading some receiver comparison reviews of radios like the NRD-545 and getting other advice from people on this ng, I became more and more interested in the IC-746Pro. It seems to be an amazing DSP DX'ing rig. I also know about the reported problems with the transmitter, but I'm not so worried about that. It can be fixed. Up until now, I have not been interested in transmitting as an amateur. Just sw listening. I figure, if I am going to get an IC-746Pro, I might as well look into getting a ham license. It might be fun.... I read a few links about the multiple choice tests for the tech license and I also saw a list of pool. My question is... How much of an ordeal is it to get set up to take the test itself ??? Michael |
#8
![]() |
|||
|
|||
![]()
The key to getting a Ham license is determination as is any license.
If you see it as an ordeal -- you'll probably flake out. If you see it as another of life's challenges -- you will pass as has 675,000 others from ages 9 to 90 For an overview -- See URL: http://www.arrl.org/hamradio.html Practice tests and tutorials at URL's: http://www.aa9pw.com/ http://www.arrl.org/arrlvec/pools.html http://www.w8mhb.com/exam/ http://www.geocities.com/w8bbs/2004techstudyguide.pdf http://www.qrz.com/p/testing.pl Good Luck as Amateur Radio is a great service with numerous hobby aspects. One Watt To steal ideas from one person is plagiarism; to steal from many is research. -- Comedian Steven Wright --------------------- "Michael" wrote in message t... Hiya..... I read a few links about the multiple choice tests for the tech license and I also saw a list of pool. My question is... How much of an ordeal is it to get set up to take the test itself ??? Michael |
#9
![]() |
|||
|
|||
![]()
Ron Hardin wrote:
You could pass any written test by memorizing the ARRL's License Manual but code was apparently the killer for grownups. Not the ARRL manual; it was that guy whose name I can't remember, who published guides made up by paying testees to remember questions and multiple-guess answers just after leaving the testing sessions. -- "The Democrats are all over this. Democratic strategists feel John Kerry's war record means he can beat Bush. They say when it comes down to it, voters will always vote for a war hero over someone who tried to get out of the war. I'll be sure to mention that to Bob Dole when I see him." -- Jay Leno |
#10
![]() |
|||
|
|||
![]() clifto wrote: Ron Hardin wrote: You could pass any written test by memorizing the ARRL's License Manual but code was apparently the killer for grownups. Not the ARRL manual; it was that guy whose name I can't remember, who published guides made up by paying testees to remember questions and multiple-guess answers just after leaving the testing sessions. That may have been Dick Bash KL7IHP... as I recall. dxAce -- "The Democrats are all over this. Democratic strategists feel John Kerry's war record means he can beat Bush. They say when it comes down to it, voters will always vote for a war hero over someone who tried to get out of the war. I'll be sure to mention that to Bob Dole when I see him." -- Jay Leno |