Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old September 15th 04, 02:17 AM
Vitor Hugo
 
Posts: n/a
Default Sony SW55 - help request

Hi everyone,

I've just get a second handed almost not used SW55 and I'm enjoying this
beautiful radio! However, I'm a newbie with the receiver and I would like to
ask you experts how you minimize this "problem".

Let's suppose I want to hear a station in 9890kHz (Signal-3 in "SINPO"
scale) ! However at same time, there's a station with stronger signal in the
9895kHz (Signal -5), and when tuning to 9890kHz I can hear those annoying
background noise from 9895kHz higher than the station of the 9890kHz. With
Sony 7600G it was very easy to solve, just turn on the sync detector, and
select LSB. How about in the SW55? How can I minimize this situation?

Other question I would like to ask is about the external antenna. I used a
Sony active antenna model AN-LP1 with my 7600G, is there any problem in
connecting it in the EXT ANT jack of the SW55, since Sony tells the antenna
is indicated to the 7600G and SW100? It's just selecting in the SW55 the
mode to "DX" and plug n play or there's anything more I should do? I'm
afraid to damage my SW55.

Thanks for your attention in advance!

73's
  #3   Report Post  
Old September 15th 04, 06:26 PM
Stephan Grossklass
 
Posts: n/a
Default

Vitor Hugo schrieb:

Hi everyone,

I've just get a second handed almost not used SW55 and I'm enjoying this
beautiful radio! However, I'm a newbie with the receiver and I would like to
ask you experts how you minimize this "problem".

Let's suppose I want to hear a station in 9890kHz (Signal-3 in "SINPO"
scale) ! However at same time, there's a station with stronger signal in the
9895kHz (Signal -5), and when tuning to 9890kHz I can hear those annoying
background noise from 9895kHz higher than the station of the 9890kHz. With
Sony 7600G it was very easy to solve, just turn on the sync detector, and
select LSB. How about in the SW55? How can I minimize this situation?


Select the narrow bandwidth and off-tune 1 or 2 kHz down, i.e. 9889 or
9888 kHz. Still not quite as good as synch but better than nothing.

Other question I would like to ask is about the external antenna. I used a
Sony active antenna model AN-LP1 with my 7600G, is there any problem in
connecting it in the EXT ANT jack of the SW55, since Sony tells the antenna
is indicated to the 7600G and SW100? It's just selecting in the SW55 the
mode to "DX" and plug n play or there's anything more I should do? I'm
afraid to damage my SW55.


The SW55 should work fine. You may need to turn on the AN-LP1 manually,
though.

Stephan
--
Meine Andere Seite: http://stephan.win31.de/
PC#6: i440BX, 1xP3-500E, 512 MiB, 18+80 GB, R9k AGP 64 MiB, 110W
This is a SCSI-inside, Legacy-plus, TCPA-free computer
  #4   Report Post  
Old September 16th 04, 10:42 AM
Mark
 
Posts: n/a
Default

Press "AM Function", then the "M5" button to change to the narrow filter. If
that doesn't stop the interference, try using SSB (USB or LSB) and tune
lower or higher to cut out the offending station.

Mark.

"Vitor Hugo" wrote in message
om...
Hi everyone,

I've just get a second handed almost not used SW55 and I'm enjoying this
beautiful radio! However, I'm a newbie with the receiver and I would like

to
ask you experts how you minimize this "problem".

Let's suppose I want to hear a station in 9890kHz (Signal-3 in "SINPO"
scale) ! However at same time, there's a station with stronger signal in

the
9895kHz (Signal -5), and when tuning to 9890kHz I can hear those annoying
background noise from 9895kHz higher than the station of the 9890kHz. With
Sony 7600G it was very easy to solve, just turn on the sync detector, and
select LSB. How about in the SW55? How can I minimize this situation?

Other question I would like to ask is about the external antenna. I used a
Sony active antenna model AN-LP1 with my 7600G, is there any problem in
connecting it in the EXT ANT jack of the SW55, since Sony tells the

antenna
is indicated to the 7600G and SW100? It's just selecting in the SW55 the
mode to "DX" and plug n play or there's anything more I should do? I'm
afraid to damage my SW55.

Thanks for your attention in advance!

73's



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
F.S. Sony SW55 BobAR8 Shortwave 3 May 17th 10 05:54 PM
Sony SW55 - help request Shortwave 0 September 15th 04 01:36 AM
Sony SW55 - SSB problem g8tzl Shortwave 4 September 11th 04 03:22 PM
Sony SW55 BobAR8 Shortwave 1 July 6th 03 04:27 PM


All times are GMT +1. The time now is 05:03 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017