Home |
Search |
Today's Posts |
#12
![]() |
|||
|
|||
![]()
Yes I am limited to the type of ant I use on the terrace. But, I seem to get
less noise using the balun. But being on the 23rd floor I have no real obstructions. So you think I should go a random single wire? What kind of transformer do you mean? I research I did on ants say you need 4 leads for a blaun to work. What can add to a single wire? Thanks for the tip. Lucky "dxAce" wrote in message ... Lucky wrote: Hi Ok right now I'm using my JRC NRD-525 with a 35 Ft dipole and a 4:1 Current balun coupled with a MFJ-959 pre-amp/tuner. I don't use the tuner that often. As you know it amps the noise too along with the signal so I use only it when absolutely neccessary. I'm on the 23rd floor of a building so I get good signals. That's your problem... you're using a dipole. A dipole is for use on a very narrow range of frequencies. Now, using the tuner, you might get a better match to the receiver. My suggestion would be to use a single wire, and match it with a transformer. I think you might get better broadband performance from that. However, you may be somewhat limited being on a 23rd floor. That's not so lucky, no pun intended. dxAce Michigan USA |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Lincolnshire Poacher | Shortwave |