LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #17   Report Post  
Old October 14th 04, 02:12 PM
dxAce
 
Posts: n/a
Default



BDK wrote:

In article , says...


RHF wrote:

= = = dxAce wrote in message
= = = ...
Michael wrote:

"GeorgeF" wrote in message
nk.net...
I have an R-5000 which works great. However I'm wondering from others who
own or have owned an R-5000 if you're gets hot? After being on for hours
mine gets so hot you "almost" can't hold your hand on the top cover. Mine
has done this for years and hasn't yet affected the receive performance but
just wondering if this normal.

My other HF rigs don't get hot (JRC NRD-525, Yaesu FT-847, RadioShack
DX-394 or Kenwood TS-520) all of which are one 12-20 hours a day.....

George
http://www.MilAirComms.com

A close friend has an R-5000. He has confirmed that it runs way hotter then
his R8b, but not so hot that you cant touch the top of the radio. He keeps
his radio on a large counter top and said that his cat likes to sit on top
of the radio when its on because its warm... :-)

The suggestion to run it on a seperate 12 volt supply is a
good one if it has the 12 volt option. I don't recall off
hand if that was standard, or an option.

DX ACE,

The DCK-2 DC Operation Kit is an "Option" for the Kenwood R-5000.
The 'kit'has two parts:
- Internal Wiring Harness with two Plugs; one Plug to mount on
the Radio's Rear Panel for 12 DC Power Input; and the other to
plug into a PC Board.
- External Wiring Harness with two Plugs; one to plug into
the Radios Rear Panel 12 DC Power Input Jack; and the other to
plug into the car's Cigarette Lighter.

The Kenwood R-5000 does run Warm to Hot when used for a few hours.


Really? Mine never did and I had it for several years. I guess our definitions of
'hot' do not concur.

dxAce
Michigan
USA




Well, all I can say is it was unpleasant to touch for very long, and it
was the hottest solid state receiver, by far that I have ever had,
including my ICOM R7100 that also ran very hot on 117 volts..


Yeah, I've heard that some of the ICOM's indeed run very hot. But I can't figure out why
anyone would say that an R-5000 ran so hot that it was unpleasant to touch. I
encountered several of them and never noticed that to be the case.

Warm yes, hot no.

dxAce
Michigan
USA


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
fs: Kenwood kpt50 repeater radio programmer Skipp has Kenwood stuff Homebrew 2 August 14th 20 06:12 PM
fs: Kenwood kpt50 repeater radio programmer Skipp has Kenwood stuff Equipment 2 June 16th 06 04:22 PM
Kenwood R-5000 (R5000) Receiver - Information and Resources RHF Shortwave 1 January 17th 05 01:03 PM
Kenwood 5000...Symptoms justtis Shortwave 11 March 27th 04 10:30 PM
fs: Kenwood kpt50 repeater radio programmer Skipp has Kenwood stuff Equipment 0 August 7th 03 06:16 PM


All times are GMT +1. The time now is 11:25 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017