the filters are there large silver filters i can see it on the main board
when the cover is removed......
and also when i use various modes and turn the selectivity switch the tone
changes. in the manual it says that the following filters are fitted YK-88C
and YK-88SN...these various setting are for usb / lsb / cw / fsk / am / and
fm is fixed at 12hz.
i am looking to sell this receiver its in 100%working order.
the condition is ok has a few marks nothing serious....
serious offers taken on this receiver..

THANKS



"dxAce" wrote in message
...


big boy now wrote:

i have a Kenwood R5000 i know this unit has the VHF converter fitted.
i think this has had extra filters fitted my reason fir thinking this is
the
case is as follows...
on the receiver there is a five position selectivity switch. in the
manual
there is a print of the receiver and on this switch the writing next to
each
position reads position 1 = auto
" 2 = N
" 3 = M1
" 4 = M2
" 5 = W

somebody has added more numbers next to each position and they now read
Position 1 = auto
" 2 = N 500 has been
added
" 3 = M1 1.8 has
been
added
" 4 = M2 2.4 has
been
added
" 5 = W 6.0 has
been
added

does this mean that the extra filters have been added to this R5000
is there any other way i can tell what filters have been fitted
to this receiver......were are the filters mounted internally in this
receiver

Under the cover! It looks like they have been added, however, they may
have also
been removed.

The manual should show you where they are.

dxAce
Michigan
USA