Radios sound great with batteries, but when plugged in, sound is appreciably
poorer. Is there a real solution to this?

DJM

Daniel J. Morlan wrote:
Radios sound great with batteries, but when plugged in, sound is appreciably
poorer. Is there a real solution to this?

DJM

Have you tried ferrites?

Steve

First off, some radios like the GE Superadio series and other AM/FM/SW
portables are inherently noisier on AC power. Not much you can do about it
other than use batteries for serious listening. Receivers meant for AC power
only are usually better shielded and filtered.

What I'd do is plug the radio in and shut off all other power box circuit
breakers except the circuit the radio is on. If the noise persists, it's
either the radio or some other electrical device hooked into that circuit.
If the noise goes away, turn on circuit breakers one by one until the noise
comes back... then investigate items on the last breaker thrown.

Could also be a functional, yet marginal power transformer up the street, a
neighbors microwave or window air conditioner, or even bad wiring in your
walls or at the pole. Electrical noise can be tricky to find. Good luck!

"Daniel J. Morlan" wrote in message
m...

Radios sound great with batteries, but when plugged in, sound is
appreciably poorer. Is there a real solution to this?

"Daniel J. Morlan" wrote in message
m...
Radios sound great with batteries, but when plugged in, sound is
appreciably
poorer. Is there a real solution to this?

DJM

Call the power company and tell them their Pole Insulators
and/or Transformer Insulator Bushings are arcing over.
Power companies seem more receptive to this type of
trouble as modern computer equipment needs a clean
source of power, or so their PR in Transmission and
Distribution Magazine says so. http://www.tdworld.com/

Thanks for all the info, fellas... I'm looking into it.

Regards,

Daniel


"Dr. JT Windbag" wrote in message
groups.com...

"Daniel J. Morlan" wrote in message
m...
Radios sound great with batteries, but when plugged in, sound is
appreciably
poorer. Is there a real solution to this?

DJM

Call the power company and tell them their Pole Insulators
and/or Transformer Insulator Bushings are arcing over.
Power companies seem more receptive to this type of
trouble as modern computer equipment needs a clean
source of power, or so their PR in Transmission and
Distribution Magazine says so. http://www.tdworld.com/

otayyyy,you are wellcome.
cuhulin

move

hope that helped


-MMWTMP


"Daniel J. Morlan" wrote in message
m...
Radios sound great with batteries, but when plugged in, sound is
appreciably poorer. Is there a real solution to this?

DJM

In article ,
"Daniel J. Morlan" wrote:

Radios sound great with batteries, but when plugged in, sound is appreciably
poorer. Is there a real solution to this?

DJM

I get better reception on my radios with AC power cords when I plug them
in through a computer surge protector rather than directly into the wall.

In article ,
"chef@dennys" wrote:

First off, some radios like the GE Superadio series and other AM/FM/SW
portables are inherently noisier on AC power. Not much you can do about it
other than use batteries for serious listening. Receivers meant for AC power
only are usually better shielded and filtered.


Actually, the GE Superadio III is exactly the model where I discovered
that if I plug it into a computer surge protector rather than into the
wall socket I got much better performance.

In article ,
arbusto wrote:

In article ,
"Daniel J. Morlan" wrote:

Radios sound great with batteries, but when plugged in, sound is
appreciably
poorer. Is there a real solution to this?

DJM

I get better reception on my radios with AC power cords when I plug them
in through a computer surge protector rather than directly into the wall.

Some of those surge protector strips also have filtering, which may be
helping.

--
Telamon
Ventura, California