| Home |
| Search |
| Today's Posts |
|
#4
|
|||
|
|||
|
The following website describes the best way to install a random wire or
inverted-L antenna to minimize the noise from domestic sources. The vertical downlead wire should be located a considerable distance from the house (at least 20-ft). This is where the ground connection is made at the bottom of the downlead and the matching transformer. Coax is run on/in the ground from the transformer, back to the receiver in the house. http://www.anarc.org/naswa/badx/ante...e_antenna.html Robert11 wrote: Hello: For a receiving only application: Any opinions as to how far away from a house (with the normal compliment of PC's, broadband, etc. noise producers) the vertical leg of an inverted-L antenna should be so as not to pick up any meaningful amounts of household electrical noise ? I imagine that these fields diminish very, very quickly with distance ? The reason I'm asking is that the easiest thing for me, by far, would be to run the vertical leg up the outside of the house, perhaps on 6 inch standoffs. The high horiz. leg would lead away from the house. I realize that the further the better, but would 6" be "enough" ? Any thoughts on ? Bob |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Question is 'it' a Longwire {Random Wire} Antenna -or- Inverted "L" Antenna ? | Shortwave | |||
| Imax ground plane question | CB | |||
| Noise Reducing Antennas | Shortwave | |||
| Outdoor Scanner antenna and eventually a reference to SW reception | Shortwave | |||
| Automatic RF noise cancellation and audio noise measurement | Homebrew | |||