Home |
Search |
Today's Posts |
#5
![]() |
|||
|
|||
![]()
In article ,
D Peter Maus wrote: Dale Parfitt wrote: "D Peter Maus" wrote in message ... After reading some of the horrifying things I'd read here about Ten-Tec service, I decided to experience it for myself. The backlight on my RX-350 became unstable. Not having a service manual, I called Ten-Tec and spoke with Service, and they gave me, over the phone, the location of the trouble, the identity of the faulty parts, and tricks and techniques to correct the problem. Not bad for a first contact on a radio that's out of warranty. As helpful as that was, I really wanted to see what the story was in dealing with an actual repair at the factory, so I sent it in anyway. I got an e-mail on the radio's arrival, a job number, a telephone number to call should I have questions, and an estimate of cost and turnaround time. $83, and 4-6 weeks. At 4 weeks, I sent an e-mail inquiring about the job, and found that there was already a notice of completion in my mail trash folder, due to some pretty tight spam filtering. The total for the job was $83 and change, including return shipping by FedEx Ground. I could pay by check, money order or credit card. So, when the invoice arrived 48 hours later, I sent them a check. Less than 7 days later the radio arrived, good as new, cleaned of all fingerprints, dust and assorted handling marks, boxed to survive a head-on with a Volvo. It also looks like they touched up alignment. Total turnaround: 5 weeks. Worth noting, when you hear dissatisfied users, that there are satisfactory outcomes. Hi Peter, This has always been my experience with T-T. No phone menues and holds to put up with- always a friendly voice when you call. Dale W4OP Yeah, the guy I spoke with was a hoot. Clearly a ham who loved the hobby, his profession, and enjoyed talking to other radio hobbycraft practitioners. I did some digging before I bought the Ten-Tec and based on the recommmendation of a former member of this newsgroup--ex-VOA and an Extra class ham at that--I decided to make some calls to Ten-Tec about product, service, ongoing support and whether Dolly interferes with reception above 15 Mhz. I found them to be quite well informed, eager to assist, and in general good humor. Not unlike the ICOM techs at Bellevue. It was a no brainer. Bought the radio and have had nothing but pleasant surprises since. I called their tech support once with several questions and they answered my call with no waiting. They were helpful, knowledgeable and pleasant. -- Telamon Ventura, California |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FCC: Broadband Power Line Systems | Policy | |||
National NC60 service info or service manual | Boatanchors | |||
National NC60 service info or service manual | Boatanchors | |||
BBC World Service increases its presence in Argentina | Broadcasting | |||
Looking for RCA 67QR77M Service Info (West German Built Radio from about 1959) | Swap |